Cable Pulling Equipment GP100 Yanmar Japan Puller Max Pull Force: 100kN
| Model |
GP100 |
| Max pull force |
100kN |
| Continuous pull effort |
80kN |
| Max speed at Continuous pull |
17m/min |
| Max speed |
83m/min |
| Pull at max speed |
15kN |
| Capstans |
350x650mm |
| Maximum cable diameter |
80 mm |
| Total weight |
3350kg |
|
Overall dimension
(length*width*height)
|
4000*2200*1800mm |
| Diesel |
Yanmar Japan 49.2hp/36kw |
| Cooling system |
Water |
| Electrical system |
12V |
| Engine |
Yanmar Japan |
| Hydraulic motor |
Rexroth German |
| Hydraulic pump |
Danfoss |
| Hydraulic meter |
German |
| Operating handle |
Bondioli & Pavesi Italy |
| Hydraulic valve |
Sun USA |
Configuration
- Control panel with instruments for hydraulic system and engine.
- Hydraulic emergency brake operates automatically at the center of the instruction bar or in the case of hydraulic failure (not suitable for lifting)
- Large channel steel capstan with anti-skid device
- Hydraulic oil cooling system
- In the case of over pull, the preset for maximum tension can stop the puller
- The hydrostatic loop, which allows the puller to continue to change speed in two rotational modes, can operate only one command
Additional Devices
- Lighting system for the trailer
- Rear tension roller with hydraulic drive
- Chassis, with damping shaft, tires, traction lever, Trailer for towing at max speed of 30 km/h
- Digital speed and meter counter (extra charge)
