SA-QY40 110KV Groove 7 Hydraulic Puller OPGW / ADSS Cable Stringing Equipment
GS40 Cable Stringing Equipment
Together with tension machine, this model allows for the tension stringing of 220kV lines in mountainous
and hilly areas and can be used for the traction stringing of OPGW or ADSS cable in various terrains.
GS40 Cable Stringing Equipment Performance
Max intermittent pull 40kN
Max continuous pull 30kN
Speed at max pull 2.5km/h
Max speed 5km/h
Pull at max speed 20kN |
GS40 Cable Stringing Equipment Engine
|
Diesel 77kw(103hp)
Cooling system water
Electrical system 24V
|
GS40 Cable Stringing Equipment Characteristics
|
Bull-wheel diameter 400mm
Groove number 7
Max rope diameter 16mm
Max diameter of rope reel 1200mm
Total weight 3000kg
Overall dimension 3800×2020×2340mm
|
GS40 Cable Stringing Equipment Main Configuration
|
Engine imported
Main pump German Rexroth
Main motor speed reducer German Rexroth
Tail bracket hoisting motor American Eton
Hydraulic meter German WIKA
Operating handle German Rexroth
|
GS40 Cable Stringing Equipment Configuration
·Hydraulic dynamometer with set-point and automatic control of maximum pull
·Hydraulic oil cooling system
·Control instruments for hydraulic system and diesel engine
·On board reel winder with automatic level wind, suitable for standard reel mod. 1100 and 1200
·Hydraulic front stabilizer
·Grounding connection point
GS40 Cable Stringing Equipment Hydraulic Transmission
Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided
with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced
to "0") by automatically adjusting the operation speed according to the friction and unexpected loads
which may occur.
GS40 Cable Stringing Equipment Additional Devices
·Lighting system for the trailer
·Hydraulic rope clamp for reel change
·Swivel guide rope roller
·Trailer for towing at max speed of 30 km/h
·Extra shaft
·Digital speed and meter counter (extra charge)