The manufacturing of the steel beam electric track flat car is a process involving precise engineering and the assembly of solid steel structures. Its manufacturing process involves designing and processing the main load-bearing steel frame, integrating a powerful motor drive system, and installing reliable track guidance mechanisms. The core steps in the manufacturing process typically involve the use of high-strength steel plates and profiles, reinforcing and welding key seams, and assembling axles and wheel sets designed for maximum load capacity and long service life. The final produced flatcar is sturdy, durable, efficient and reliable. It is specially designed for the precise and safe repeated transportation of heavy steel beams and other long materials on fixed workshop or warehouse tracks, thereby optimizing the material handling process.

What Surfaces does the Flat Transfer Trolley Travel On?

The On-rail Transfer Cart is designed with flanged wheels and travels on rail. Most applications are on level surfaces; however, it is possible for carts to travel on inclines not greater than 4°.
With steerable carts flat tread steel wheels (hardened tread surface) come standard and are fine for most concrete smooth to semi smooth floors. For non-marking epoxy floor systems, optional urethane wheels can be ordered (up to 20 ton capacity). Carts are not designed for uneven surfaces such as gravel, rough terrain, or badly cracked concrete floors.

---- Low noise It causes low noise level.
---- Maximum safety Offers guarantee of maximum safety for operators and for the material handled. We really care about the safety of everyone involved in the job.
---- Easy for operation These vehicles are easy to drive, so as soon as you get it you will be able to use it to transport your loads. We will support you to make the best out of your heavy load transporter.
---- Easy to implement into manufacturing process Operates on standard floors; Do not require complex or permanent installation
---- Suitable for All Kinds of Weight The steering battery powered trolley is superb for handling both small and extremely huge loads for its modular fabrication and its high payloads: up to 300 ton for each trolley.

*For lenght is less than 6m, the width is less than 2.2m. It will be transported by 20ft container. If the length is longer than 5.9m and less than 12m, it will be transported by 40ft container. If the quantity is 2 sets or 3 sets, they can be transported by full container. If the quantity is 1 set, it can be transported by LCL Container.
* If the length is less than 12m, the width is beyond 2.2m. It needs to be transported by flat rack (20 or 40 ft) . If the equipment is beyond above dimension, and quantity need to consider bulk cargo.