5 Ton Transfer Trolley Manufactured By Remarkable For Heavy Industrial Handling

^{Remarkable designed and produced Self - propelled industrial heavy-duty die transporter mold transfer trolley, it is dangerous if transporting by crane, and the transporting route is limited, but Remarkable manufacture the transfer trolley could overcome the shortage with the unlimited transporting route. which is maintenance-free battery powered so that it can reduce the maintenance cost. PU wheel (Solid Tyre) installed so that it can run on the ground to reduce the repair for the ground.}

^{Contact Us For A Free Consultation Based On Your Requirements. Remarkable Sells Its heavy-duty transfer trolley!}

Customized Automatic Trackless Trolley technical parameter:

Attention

^{The staff should concentrate on operating the cart when using it, pay attention to the direction of travel at all times, and observe the operation of other equipment around, which means that the equipment does not collide with other equipment during operation. , And the staff shall not do anything unrelated to work during the driving process.}

^{When it is close to the end of the track, pay attention to choosing the jog mode, stop in advance, and avoid hitting the stopper, causing the material to slip off due to inertia.}

^{When the equipment is running, do not start the emergency stop in an emergency. When working, two people must cooperate at the same time. One person operates the electric flatbed truck, and the other person pays attention to the goods on the truck and the surrounding conditions. If there is any situation, the operator should be notified in time}

^{After using the electric transfer cart, the cart should be stopped and the power supply should be disconnected, so as to clean the work area in time and leave after the inspection is correct.}

^{It is recommended to discharge the battery of the electric transfer cart every 2 months to keep the battery performance in a relatively good state. Generally, the battery is prone to leakage and other phenomena in a humid and corrosive environment, and the battery is damaged quickly, so it is necessary to check it regularly. The location of the battery of the electric flat car should be checked for liquid leakage, oil leakage, etc., and the location should be clean and dry.}

^{Electric rail carts can’t avoid breakdowns after they are used for a long time. Therefore, the daily maintenance and repairs of electric flat cars are still necessary. They also need to be repaired when they fail. Whether the mechanical system is good, whether the tires need to be replaced, and whether the control performance is good. Whether the battery capacity is up to the standard, the motor must be repaired once a year.}