TOPFENCE provided complete soultions galvanized temporary fencing from productions to pakcing and sales to overseas australia and NZ
Brackets:
They tend to reinforcethe entire temporary system and prevent it from tipping over.
Clips & pins:
They bind wire meshes tightly together, allowing easy removal and reu
Packaging & Loading
--- Feet and top clips in plastic bag
---Panel in nude or in pallet (wood or metal )
---Other special package according to customers’ requirement
Features
1.This range of galvanized steel wire fence is easy to install, either in-ground or above-ground, without the need to dig holes or damage the landscaping on which the event is held.
2. Guaranteed long-term use without rusting
3. Allow repeated use, rental, or resale
4. 100% Australian standards compliant
5. The horizontal pipes of the temporary fence are smashed flat to withstand higher loads.
Temporary fence production flow:
Pre hot dip galvanized wire drawing--- cut wire and pipes ---wire welded---cut the corners of the mesh---Pre hot dip galvanized pipes welded—polish the welds—paint anti-rust epoxy—spray sliver powder coat on each welds—packaging
| Description | |
| Material | hot dipped galvanized tuber steel and welded wire mesh panel |
| Surface treatment | hot-dipped galvanized |
| Specification | |
| Wire diameter | 3mm, 4mm |
| H*L | 2100x2400, 1800x2400, 2100x2900, 2100x3300mm, etc |
| Frame pipe O.D. | 32mm (popular), 42mm, 48mm, etc |
| Opening | Chain link mesh: 50x50, 60x60mm, etc. |
| Welded mesh: 75x75, 75x100, 60x150mm(popular), etc | |
| Wall thickness | 1.4mm, 1.8mm or 2mm |
| Clamp |
suit for different outer diameter pipe 75mm center space 100mm center space |
| Fence base material | plastic base with concrete inside |
| Fence base type |
blow molded: 600x220x150mm injection molded: 560x240x130mm |
| Extra brace frame tube | 32mm, 42mm or 48mm O.D |
| Brace height | 1.8m |
| Material | polypropylene | |
| Color | A variety of brilliant colors are available including red, yellow, orange and blue | |
| Thickness | 2.5mm | |
| Hole Size | 25mm, 32mm, 38mm, 42mm, 48mm | |
| Logo attachment | Upon your request | |
| Style | Injection Molded Base | Size: 560 x 245 x 130mm |
| Weight: 33kg | ||
| Blow / film Molded Base | Size: 600 x 220 x 150mm | |
| Weight:29kg | ||
|
Two Part Base
|
Size: 600 x 220 x 100mm | |
| Weight: 15kg | ||
