Hot Dipped Galvanized Electric Metallic Tube EMT Conduit Fittings UL Standard

UL Listed Pre /Hot Dipped Galvanized Electric Metallic Tube EMT Conduit

Description:
Electrical metallic tubing (EMT),, is commonly used instead of galvanized rigid conduit (GRC), as it is less costly and lighter than GRC.

Standard size : from 1/2” to 2”
Stardard length: 3050mm or according to customer’s requirement
Surface finished: Hot dip galvanized(HDG).(ALSO CAN CHOOSE PRE-GALVANIZEDA)
Material : carbon steel coil
Package: emt conduits tied into small bundles with steel straps, and covers with white plastic bag.
Standard length:3.05m
Brand: TOPELE


Electrical Metallic Tubing—EMT
Another example of a rigid electrical conduit is EMT (electrical metal tubing), which is most commonly made of galvanized steel but can also be aluminum. EMT is also called "thin-wall" conduit because it is thin and lightweight, especially compared to RMC. EMT is rigid but can be bent with a simple tool called a conduit bender.
EMT is installed with couplings and fittings that are secured with setscrew or compression-type fasteners. The tubing itself is not threaded like RMC and IMC. Common sizes of EMT include 1/2-inch, 3/4-inch, and 1-inch. It is commonly used for exposed indoor wiring runs in residential and light commercial construction. If installed outdoors in exposed locations, it must be assembled with special watertight fittings.


Specifications:

TOPELE EMT Conduit protects the cables from magnetic fields, impact damage and crushing. The steel conduit resists splitting, kinking and flattening and is coated with zinc for corrosion resistance. Weld internal polishing provides a smooth surface for faster wire pulling and prevent cutting cables.