120mm Steel Shell Material Integrated Economizer Heat Exchanger For Farms RAK06-CMF-Z
|
Product name
|
Enthalpy-adding Heat Exchanger
|
|
Type
|
R series enthalpy-adding
|
|
Model number
|
RAK06-CMF-Z
|
|
Heating capacity
|
18kw
|
|
Cooling capacity
|
14kw
|
|
Water flow
|
2.75m^3/h
|
|
Use as
|
Condenser,Evaporator
|
Product Introduction :
Enthalpy-adding is Optional additional structure in tube-in-shell heat exchanger. All of our tube-in-shell heat exchanger products can be added this structure.
Enthalpy-adding Heat Exchanger integrates the economizer into the heat exchanger, which significantly improves the heat transfer efficiency of the heat exchanger at low temperature(Below-10℃). The integrated design allows customers to reduce the volume of equipment and production costs without additional configuration of the economizer.
Product Features :
• Enthalpy-adding structure can Considerably improve the heating efficiency at low temperature condition.
• Due to the integrated design, heat exchange equipment can be made smaller and cheaper
• It is Optional additional structure of all of our tube in shell heat exchanger products.
Product list :
All of tube-in-shell heat exchanger
|
product
|
Common Version Heat Exchanger
|
R series Heat Exchanger
|
|
|
Compact Version Heat Exchanger
|
Double Wall Tube Heat Exchanger
|
|
|
Multitube Heat Exchanger
|
|
Principle of economizer :
High-pressure liquid refrigerant from condenser is divided into two parts. One part of refrigerant absorbs heat through throttling expansion and becomes two-phase (gaseous and liquid) fluid with low temperature and pressure.Two-phase fluid exchanges heat with another part of liquid refrigerant through economizer, so that the other part of refrigerant can get lower temperature. Two-phase fluid becomes gas and enters the compressor to continue cycle. The other part of low temperature liquid directly enters the evaporator for refrigeration .
Principle of enthalpy-adding heat exchanger :
Enthalpy-adding structure is an economizer integrated in the heat exchanger, Enthalpy-adding heat exchanger is usually used as condenser. This structure can significantly improve the heat exchange efficiency at low temperature(Below-10℃).