RAL1020 olive yellow epoxy polyester Powder Coating for indoor applications
Feature:
Good bond ability and mechanical performance
Smooth and glossy
Certified chemical resistance
Better heat resistance and light resistance than pure epoxy powder
The most common hybrid powder coating consists of a blend of carboxyl polyester and epoxy resins. Depending upon the formula the ratio of polyester to epoxy ranges from 50:50 to 70:30. Why, you wonder, would a chemist vary this ratio? There are a number of factors that influence this choice.
Product availability:
-Color: RAL, PANTON, CUSTOMIZED
-Gloss Range: 0-98% (smooth surface at 60°)
-Surface: Smooth and special finish (texture, wrinkle, hammer etc) for all kinds of glos
-Density: 1.2-1.8 g/cm3
Curing guide: 180°C/20min, 190°C/15min or 200°C/10min
| Properties | Method | Value | |
| Impact | GB/T 1732-1993 | ISO 6272 | 50kg.cm(Direct) |
| Cupping test | GB/T 9753-1988 | ISO 1520 | ≥7mm |
| Adhesion(Cross Cut) | GB/T 9286-1998 | ISO 2409 | 0 Grade |
| Flexibility | GB/T 6742-1986 | ISO 1519 | 2mm |
| Pencil Hardness | GB/T 6739-2006 | ASTM D3363 | H~2H |
| Salt Spray | GB/T 1771-2007 | ISO 7253 | ≥500h |
| Humidity | GB/T 1740-2007 | ISO 6270 | ≥1000h |
| Coating thickness: 40-70μm | |||
| Item | Index |
| Color | In accordance with standard panels or within the range, negotiated by custom or supplier |
| Appearance(visual) | Smooth, slight orange peeled |
| Gloss(60°gauge head) | High gloss type≥85% Semi gloss type:51-84% |
| Cured film thickness | 60-80μm |
| Impact resistance | 50kg.cm (4.9Nm) pass (direct) |
| Pencil hardness | 2H without scratch |
| Adhesion(cross cut test) | 1mm 6x6 0 grade |
| Bending test | 3mm pass |
| Salt spray test | 500h <1 grade |
| Humid heat resistance | 500h <1 grade |
| Cupping test | ≥6mm |
