
CE+T modular inverter TSI BRAVO series 24V / 48V / 60V / 110 V / 220 Vdc Output 230 Vac DC to AC inverter.
BRAVO is a compact and scalable modular inverter providing a pure sine wave AC supply. In conjunction with a DC
Power system, it provides an excellent AC backup
solution. It uses the latest inverter technology, providing superior energy efficiency in a compact size.
The “Twin Sine Innovation” (TSI) technology eliminates all
single points of failure with full scalability; up to 32 modules in parallel and high efficiency of up to 96 % reducing operating costs.
l Dual input sources (AC & DC)
l with wide AC input range 150 Vac to 265 Vac
l Compact design
l High efficiency
l Transfer time reduced to 0
l up to 10kVA in 2 U
l up to 225kVA in 3 enclosures of 75kVA each




| 24 / 230 | 48 / 230 | 60 / 230 | 110 ** / 230 | 220***/ 230 | |
| GENERAL | |||||
| EMC (immunity) | EN 61000-4-2 / EN 61000-4-3 / EN 61000-4-4 / EN 61000-4-5 / EN 61000-4-6 / EN 61000-4-8 | ||||
| EMC (emission) (class) | EN 55022 (A) | EN 55022 (B) | EN 55022 (A) | EN 55022 (B) | |
| Safety | EN62040-1 | ||||
| Cooling / Isolation | Forced / Doubled | ||||
| MTBF | 240 000 hrs (MIL-217-F) | ||||
| Efficiency (Typical): Enhanced power conversion / on line | > 95.5% / > 89.5% | 96% / 91% | 96.5% / 92.5% | ||
| Dielectric strength DC/AC | 4300 Vdc | ||||
| True Redundant Systems – compliant |  			 3 disconnection levels on AC out and DC in power ports 4 disconnection levels on AC in port  |  		||||
| RoHS | Compliant | ||||
| Vibration | GR63 office vibration 0 to 100 hz-0.1 g / transport vibration 5-100 Hz 0.5 g 100 to 500 hz-1.5 g / Drop test | ||||
| Operating conditions |  			 Designed for installation in an IP20 or IP21 environment. When installed in a dusty or humid environment, appropriate measures (air filtering, …) must be taken.  |  		||||
| Altitude above sea without de-rating | < 1500 m / derating > 1500 m – 0.8 % per 100 m | ||||
| Ambient / storage temperature / relative humidity | -20 to 50 ° C / -40 to 70 ° C / 95 %, non-condensing | ||||
| Material (casing) | Coated steel-ALU ZINC | ||||
| AC OUTPUT POWER | |||||
| Nominal Output power (VA) / (W) | 1500 / 1200 | 2500 / 2000 | |||
| Short time overload capacity | 150 % (15 seconds) 110 % permanent within T° range | ||||
| Admissible load power factor | Full power rating from 0 inductive to 0 capacitive | ||||
| Internal temperature management and switch off | Yes | ||||
| DC INPUT SPECIFICATIONS | |||||
| Nominal voltage (DC) | 24 V | 48 V | 60 V | 110 V | 220 V | 
| Voltage range (DC) | 19 – 35 V | 40 - 60 V | 48 - 72 V | 90 - 160 V | 170 - 300 V | 
| Nominal current |  			 56 A (at 24 Vdc and 1200 W output)  |  			 			 46 A (at 48 Vdc and 2000 W output)  |  			 			 35 A (at 60 Vdc and 2000 W output  |  			 			 19 A (at 110 Vdc and 2000 W output)  |  			 			 9.8 A (at 220 Vdc and 2000 W output  |  		
| Maximum input current (for 15 second) / voltage ripple | 84 A / < 100 mV rms |  			 84 A / < 2 mV Psopho  |  			52 A < 100 mV rms | 29 A / < 200 mV rms |  			 14.9 A / < 200 mV rms  |  		
| Input voltage boundaries | User selectable with T2S interface | ||||
|  			 AC INPUT SPECIFICATIONS AC input available only with EPC modules, REG modules do not have any ACin  |  		|||||
| Nominal voltage (AC) | 220/230/240 V 1P or 3P (Min 3 shelves for 3P) | ||||
| Voltage range (AC) | 150-265 V | ||||
|  			 
 Brownout  |  			150 to 185 V linear derating 150 VA/120 Watts per 10 Vac | ||||
|  			 1200 VA / 960 W @ 150 Vac  |  			2000 VA/1600 W @ 150 Vac | ||||
| Conformity range before transfer to DC | Adjustable | ||||
| Power factor | > 99% | ||||
| Frequency range (selectable) / synchronization range | 50 – 60 Hz / range 47 – 53 Hz / 57 – 63 Hz | ||||
| AC OUTPUT SPECIFICATIONS | |||||
| Nominal voltage (AC*) | 220/230/240 V | ||||
| Frequency / frequency accuracy | 50 - 60 Hz / 0.03 % | ||||
| Total harmonic distortion (resistive load) | < 1.5 % | ||||
| Load impact recovery time | 0.4 ms | ||||
| Turn on delay | 20 s to 40 s depending on the number of module installed | ||||
| Nominal current. Protected against reverse current | 6.6 A | 10.9 A | |||
| Crest factor at nominal power | 2.8 : 1 | 3 : 1 | |||
| With short circuit management and protection | |||||
| Short circuit clear up capacity |  			 10 x In for 20 msec - Available while Mains is available at AC input port With magnitude control and management  |  		||||
| Short circuit current after clear up capacity | 2.1 In during 15 s and 1.5 In after 15 s | ||||
| IN TRANSFER PERFORMANCE | |||||
| Max. voltage interruption / total transient voltage duration (max) | 0 s / 0 s | ||||
| SIGNALING & SUPERVISION | |||||
| Display | Synoptic LED | ||||
| Alarms output / supervision | Dry contacts on shelf / Standard USB port and MODBUS on T2S, optional : Candis Display / Candis TCP-IP | ||||
| Remote on / off | on rear terminal of the shelf via T2S | ||||




