The cell is spcially design for DIY EV Battery pack
Specification for 3.2V LiFePO4 Cell High Power 38120HP 8AH With Stud and Frame For DIY EV Battery
| ITEM | SPECIFICATION | |
| Standard Capacity | 8000mAh (0.5c) | |
| Stand Voltage | 3.2V | |
| resistance | ≤5mΩ | |
| Max charging current | 5C(40A) | |
| Max chargeing voltage | 3.65±0.05V | |
| Max continue discharge current | 20C(160A) | |
| Plus discharge current | 25C(200A) | |
| end voltage | 2.0V | |
| size | D | 38±1mm |
| H | 122 ±1mm (132±1mm) | |
| Weight | 约300g | |
| worke temperature | charging | 0~45℃ |
| discharging | -20~60℃ | |
| storage temperature | within one month | -20~45℃ |
| | within six month | -20~35℃ |



The buyer can DIY EV Battery with your capacity and voltage requirement
We can support batteries connect tag Plastci frame
the battery application for EV E-Car

Drawing for Cell

Packing Detail
Double protect

Waste Disposal Method
It is recommended to discharge the battery to the end,handing in the abandoned batteries to related department unified,dispose of the batteries in accordance with approved local,state,and federal requirements.Consult state environmental protection agency and/or federal EPA.