a. Extremely safe and stable chemistry: PCB and/or BMS built inside to balance protect the battery.
b. Long life-cycle: Can be circularly used, best can up to 2000 times recycles, 8 times of Lead acid battery.
c. Lighter weight, with the best power-to-weight ratio: 1/3 of Lead acid battery weight.
d. Good performance at high temperature and high temperature resistance
e. Low self-discharge rate, less than 3% monthly.
f. No memory effects and highly efficient charge.
g. Environment friendly: Clean and Green energy poses no pollution on our environment.
|
No. |
Items |
Specifications |
|
1 |
Charge cut-off voltage |
3.65V |
|
2 |
Nominal voltage |
3.2V |
|
3 |
Minimal capacity |
2300mAh @ 1C Discharge |
|
4 |
Nominal capacity |
2350mAh @ 1C Discharge |
|
5 |
Charge current |
1C |
|
6 |
Standard charging method |
1C CC (constant current) charge to 3.65V, then CV (constant voltage 3.65V) charge till charge current decline to £ 0.05C |
|
7 |
Charging time |
Standard charge: 2.0 hours Ref |
|
8 |
Max. charge current |
5C |
|
9 |
Max. continue discharge current |
20C (Cell skin temperature cannot exceed 80°C) |
|
10 |
Discharge cut-off voltage |
2.0V |
|
11 |
Operating temperature |
Charging: -10°C ~ 45°C Discharging: -20°C ~ 60°C (Cell skin temperature cannot exceed 80°C) |
|
12 |
Storage temperature/humidity |
Temperature -10°C ~ +35°C Humidity 65%±20%RH (Recommended to store 23 ± 5°C for long term storage) |
|
13 |
Cell Weight |
78.0g±1.0g |
|
14 |
Cell Dimension |
Length: 65.0±0.3 mm Width: 26.2±0.2 mm |
Application :
this is specially design for high power use for E-Bike power tool etc
Pictures:
Power Type LiFePo4 IFR26650 2300mAh 3.2V For Power Tool





