AFK R41 Stainless Steel High Pressure Piston Pressure Reducers
| Maximum Inlet Pressure | 3000,6000psig | ||||||||||||||||||||||||
| Outlet Pressure Ranges | 0~250, 0~500, 0~1500,0~3000psig | ||||||||||||||||||||||||
| Safety test pressure | 1.5 times maximum inlet pressure | ||||||||||||||||||||||||
| Operating Temperature | -40°F to +165°F / -40°c to 74°c | ||||||||||||||||||||||||
| Leak rate | foam test | ||||||||||||||||||||||||
| Cv value | 0.06 | ||||||||||||||||||||||||
| 1 | Body | 316L.Brass | |
| 2 | Bonnet | 316L. Brass | |
| 3 | Diafragm | 316L | |
| 4 | Strainer | 316L(10 μm) | |
| 5 | Seat | PCTFE | |
| 6 | Spring | 316L | |
| 7 | Plunger valve core | 316L | |
| 8 | o-ring | viton | |
DESIGN FEATURES
| 1 | Single-stage reduce structure |
| 2 | Use hard-seal between body and Diaphragm |
| 3 | Body Thread:1/4" NPT (F) |
| 4 | Filter mesh inside |
| 5 | Easy to sweep inside body |
| 6 | Panel mountable or wall mounted |
| R41 | L | B | B | D | G | 00 | 00 | P |
| Item | Body Materia | Body Hole | Inlet Pressure | Outlet Pressure | Pressure Gauge | Inlet Size | Outlet Size | Options |
| R41 | L:316 | A | B:6000psig | D:0~3000psig | G:MPa gauge | 00:1/4″NPT(F) | 00:1/4″NPT(F) | P:Panel mounting |
| B:Brass | B | D:3000psig | E:0~1500psig | P:Psig/bar gauge | 00:1/4″NPT(M) | 00:1/4″NPT(M) | ||
| D | F:0~500psig | W:No gauge | 10:1/8″OD | 10:1/8″OD | ||||
| G | G:0~250psig | 11:1/4″OD | 11:1/4″OD | |||||
| J | 12:3/8″OD | 12:3/8″OD | ||||||
| M | 15:6mm”OD | 15:6mm”OD | ||||||
| 16:8mm”OD | 16:8mm”OD | |||||||
| Other type is available | Other type is available |