Product Description of high pressure gas secondary pressure regulator

Pressure Regulator Operation
Regulators reduce the pressure of a gas or liquid from a source, such as a cylinder or compressor, to a lower value needed by a device, such as an analyzer. A pressure regulator provides better resolution and control when its inlet and control range pressures closely match the pressure requirements of the fluid handling system. Resolution is the number of handle turns needed to adjust a regulator from its lowest to highest outlet pressure setting. Control is the ability of the regulator to hold a given outlet pressure set point.

Features of dual stage co2 gas pressure regulator
1. Bipolar diaphragm structure

2. The corrugated diaphragm design has excellent sensitivity and life
3. It can be used for corrosive and toxic gases
4. Install a 20 micron filter element at the inlet
5. Oxygen environment application options are available

Specification of stainless steel co2 regulator high pressure

Engineering case

Applicable scenarios

FAQ

Q1. What products can you provide?

Re: High pressure regulator, cylinder gas regulator, ball valve, needle valve, compression fittings(connections).

Q2. Can you make the products based on our requests, such as connection, thread, pressure and so on?

Re: Yes, We have experienced techincal team and can design and produce the products according to your requirements. Take a pressure regualtor for example, we can set the range of pressure gauge according actual working pressure, if the regulator is connected to a gas cylinder, we can add an adaptor such as CGA320 or CGA580 to connect the regulator with the cylinder valve.

Q3. What about the quality and price?

Re: Quality is very good. Price is not low but pretty reasonable at this quality level.

Q4. Can you provide samples to test? For free?

Re: Of course, you can take several to test firstly. Your side shall bear the cost due to its high value.

Q5. Can you operate OEM orders?

Re: Yes, OEM is supported though we also have our own brand named AFK.

Q6. What payment methods for chose?

Re: For small order, 100% Paypal, Western Union and T/T in advance. For bulk purchase, 30%T/T, Western Union, L/C as deposit, and 70% balance paid before shipment.

Q7. How about the lead time?

Re: Usually, delivery time is 5-7 working days for sample, 10-15 working days for mass production.

Q8. How will you ship the goods?

Re: For small amount, international express is used mostly such as DHL, FedEx, UPS, TNT. For large amount, by air or by sea. Besides, you also can have your own forwarder pick up the goods and arrange the shipment.