Polypropylene PP Geomalla Triaxial Geogrid for Civil Engineering Project TX150
Triaxial geogrid is manufactured from a punched polypropylene sheet, which is then oriented in three substantially equilateral directions so that the resulting ribs shall have a high degree of molecular orientation, which continues at least in part through the mass of the integral node.
Index Properties | TX5 | TX7 | TX120 | TX160 |
Rib pitch(2) , mm (in) Longitudinal | 40 (1.60) | 40 (1.60) | 40 (1.60) | 40 (1.60) |
Rib pitch(2) , mm (in) Diagonal | 40 (1.60) | 40 (1.60) | 40 (1.60) | 40 (1.60) |
Mid-rib depth(1), mm (in) Diagonal | 1.3(0.05) | 1.2 (0.05) | 1.2 (0.05) | 1.6(0.06) |


Triaxial geogrid is widely used in soft soil foundation projects such as roads, railways, dams and ports.
1. Strengthen the stability of the subgrade, And the road surface cracking resistance
2. Strengthen the foundation of the soft soil and increase the protect ability to enhance the bearing capacity.
3. Anti-corrosive, long service life suitable for acid or alkaline environments.
4. lower weight, easy for installation.
5. Triaxial geogrid acheive same enhancement but decreasing 10%-50% total costs.



Triaxial Geogrid Industry Practice and Standards
- Technical Standards: According to the "Technical Standards for Three-Dimensional Geogrids", the parameters such as tensile strength ≥ 120kN/m, low elongation (<5%), and acid and alkali corrosion resistance must be met.
- Successful Cases: In the Beijing-Shijiazhuang Expressway project, the three-dimensional geogrid effectively controls the seepage pressure and improves the drainage performance; it significantly reduces wind erosion and settlement in the high-fill aeolian sand roadbed.