100% Virgin Plastic Sheet Waterproof HDPE Geomembrane Liner Black Polyethylene For Aquaculture Pools

The HDPE Geomembrane is a high-density polyethylene liner designed for environmental protection and containment applications. With its robust construction, it ensures a reliable barrier against liquids and contaminants, making it ideal for use in landfills, ponds, and water reservoirs. Its flexibility and resistance to chemical degradation extend its lifespan and effectiveness in diverse settings.

Key Features:

• Exceptional Durability – Engineered to withstand harsh environmental conditions and heavy usage.
• High Chemical Resistance – Provides superior protection against a wide range of chemicals.
• Flexible Installation – Easily adaptable to various applications and terrain types.
• Cost-Effective Solution – Offers a long-lasting solution at an affordable price

Welding machine(thickness from 0.2-1.5mm) Welding machine(thickness from 0.2-2.5mm)

Specification

• Thickness range:0.5-3mm(12mil-120mil), and 0.5mm/20mil, 0.75mm/30mil , 1mm/40mil, 1.5mm/60mil, 2mm/80mil thickness are popular.
• Roll width:1m-8m, normally 5.8m 6m 7m 8m,customized width

Applications

• Waste Management: Lining the bottom and side walls of landfills to effectively prevent penetration and leakage.
• Mineral Mining: Used in mine tailings ponds and stockpiles to prevent harmful substances from entering the groundwater system.
• Oil and Gas: Protection of oil storage tanks and pipelines to prevent leakage from affecting the environment.
• Water Resource Management: Anti-seepage treatment of reservoirs, ponds and channels to ensure effective preservation of water resources.

Key points of Construction Technology

1. Base surface treatment

The base layer needs to be compacted ≥95%, the surface should be flat without sharp objects, and the slope should be smoothly transitioned to avoid stress concentration.

2. Welding process

Hot melt welding is recommended, the temperature should be controlled at 280-300℃, and the weld strength should reach more than 90% of the parent material. The welder needs to be preheated during low-temperature construction.

3. Laying specifications

Extend from low to high, and the longitudinal joints should be staggered by more than 1m to avoid the corner area. After laying, an inflation test (0.06Mpa pressure) is required to ensure sealing.

Our Mission

Execute works with the levels of international standards in order to achieve the satisfaction of our clients, whom we consider our best capital.