50kA three phase Type 1 Surge Protection Device TUV certificated BR-50GR 3+1
Ac Lighting Type 1 Surge Protection Device Features:
BRITEC type 1 and type 1+2 are designed to discharge high current surges without any destruction of the installation. This surge protective device is chararcterized by its capacity to withstand impulse current with 10/350 µs wave form which simulate direct impact coming from a natural lightning current. Type 1 and Type 1+2 SPDs are placed at the entrance point of the installation, in the main distribution board for a global protection of this installation.
Ac Lighting Type 1 Surge Protection Device Technology characteristic:

| Specification | BR-50GR 4P | 
| Item name | Surge Arrester | 
| SPD dassification according to EN61643-11 | Type 1 | 
| SPD dassification according to IEC61643-11 | Class I | 
| Max continuous 0perating a.c. voltage Uc | 275V | 
| Lightning impulse current (10/350µs) limp | 50kA | 
| Norminal discharge current (8/20µs) In | 50kA | 
| Voltage protection level Up | 1.8kV | 
| Follow current extinguishing capability a.c. lifi | 3kA rms | 
|  			 Max. backup fuse  |  			 			 500A gG  |  		
|  			 Response time tA  |  			 			 ≤100ns  |  		
| For mounting on | 35mm Din rail | 
| Degree of protection | IP20 | 
| Operating temperature range Tu | -40℃—80℃ | 
| Cross-section area (Min.) | 4mm² | 
| Cross-section area (Max.) | 35mm² | 
|  			 Enclosure material  |  			 			 Thermoplastic UL94-V0  |  		
Dimension:

Ac Lighting Type 1 Surge Protection Device Application:






Q1. Does your products listed for safety?
A: Yes, we have TUV, CE, CB these certifications.
Q2. What is the lead time for sample and mass order?
A: Samples is 10 days, and 20 days for mass order.
Q3. Do you accept the OEM / ODM order?
A: Yes.
Q4. Do you have MOQ for order?
A: General our MOQ is 20 piece, but we can accept 1 piece as sample order.
Q5. Can we visit your factory before we cooperate with you?
A: Of course. Welcome to your visiting to our factory.