Industrial Pure Water Equipment For Glass Cleaning Washing

Overview:

In the glass cleaning industry, to achieve good product quality, pure water grade is generally required for glass cleaning. If the water quality is poor, a lot of impurities will remain on the surface of the glass, affecting the product quality. Therefore, pure water is always needed to clean the glass once to improve the product quality. Ordinary glass can be cleaned with first-class industrial pure water equipment.

Water Quality Standards for Glass Cleaning

Glass cleaning: Conductivity 10µS/cm.

Adopted process: First-stage reverse osmosis;

Minimum water production capacity of the equipment: 0.25 tons per hour industrial pure water equipment; Industrial pure water equipment up to 100 tons per hour

Technical parameters

Water quality standards for ultra-pure water used in coated glass lenses, optoelectronic products, leds, LCD picture tubes, and liquid crystal displays:

The water quality of the ultra-pure water produced by our company for LED, LCD picture tubes and liquid crystal displays fully complies with the ASTM pure water quality standards of the United States

The technical standards for electronic-grade water quality of the Ministry of Electronics Industry of our country (five levels of standards: 18MΩ.cm, 15MΩ.cm, 10MΩ.cm, 2MΩ.cm, and 0.5MΩ.cm)

The trial standards for high-purity water quality of the Ministry of Electronics Industry of China, the pure water indicators for the semiconductor industry of the United States, the water quality standards for integrated circuits of Japan, and the water quality standards for large-scale integrated circuits at home and abroad.

Design basis of Two-stage Reverse Osmosis Water Purification Equipment

For a complete technical solution Of TIndustrial Pure Water Equipment For Glass Cleaning Washing, please contact me. We will customize the design based on your product technical requirements and factory layout.

Process flow chart of Industrial Pure Water Equipment For Glass Cleaning Washing