Tunnel Drying Furnace For Dry Metal Parts

1. Overview

This equipment is a specialized device designed by Hongshun Company for your company's process requirements to dry metal parts. The specific structure is described below.

2. Technical parameters:

The overall dimensions of the tunnel-type drying furnace are 6200×2000×1850mm (L×W×H).

The main body is made of 1.5mm thick stainless steel plate, the inner tank is made of T=1.5mm SUS304, and the frame is made of

50*50*2.0mm Made of stainless steel square tube, the machine base is fixed with foot screws and casters.

Insulation layer: The insulation layer is 80mm thick and made of rock wool insulation.

Temperature control system: The temperature is controlled within 0~250℃, and the temperature control accuracy is within ±5℃;

Conveying method: chain mesh belt conveying, conveying speed: preset 0.5m/min,0~0.8m/min adjustable,

Temperature control: Equipped with digital display temperature control, using Japanese "OMRON" sensor;

All control systems are equipped with safety shutdown circuits and reliable grounding devices, along with emergency shutdown and alarm systems.

Display the fault location.

Automatic temperature control, automatic timing, power-off alarm when temperature reaches the set point, power-off when temperature exceeds the limit, power-off when leakage current occurs, motor overload protection

Fuse, fuseless switch and other electrical accessories for protection control circuit;

There are emergency stop buttons at both ends;

After drying, there is no moisture inside and outside the workpiece;

Our company operates strictly in accordance with the quality assurance system, ensuring that the equipment is manufactured with reasonable processes, materials and high-performance components, and that the equipment, after correct installation, normal operation and maintenance, maintains satisfactory performance throughout its service life. After the equipment manufacturing is completed, our company will conduct a detailed and comprehensive inspection of the quality and performance requirements of the equipment as stipulated in the tender document and the contract, and issue a product quality certificate and inspection record.