Features:
◎Using permanent magnet synchronous motor, featured by high efficient driving, wide torque range and low running noise.
◎Full-closed-loop control technology. High control precision. Automatic generation of door opening and closing curves. One-key debugging. Mobile phone Bluetooth debugging and remote debugging are available.
◎Equipped with car door lock, the car door can not be opened in non-level zone.The door hanger has a safety hook to prevent collision and fall off, passed 45kg soft pendulum test, which conforms to GB/T7588.1/2 standard requirement.
◎Driven weight of landing door and car door ≤ 200kg. Meet requirements of various types of door panel weight.
◎Standard I/O port. Reserving CAN communication port. Equipped with data communication function of master control system. Realizing the solutions of elevator digitalization.
◎Door operator structure is compact, lowering requirements to shaft space, adapting to small shaft and wide opening door.




Our elevator wire ropes meet special provisions and requirements. The configuration considers not only wire rope and rated load, but also traction size, resulting in tensile strength greater than the lift weight. The safety factor includes at least four wire ropes to prevent simultaneous breakage.
The elevator will automatically stop using electrical and mechanical safety devices. In case of power failure, elevator brakes engage automatically. Power supply departments typically provide advance notice for planned outages.
The door automatically restarts if touched during closing, with no danger. Anti-pinch switches prevent closure when obstruction is detected, and closing force is carefully regulated.
Elevators operate via counterweight wire ropes through traction drive, moving vertically on guide rails.
Our escalators feature integrated structures for precision and efficiency, designed for easier installation and commissioning.
Yes, we hold ISO9001, CCC, and CE Certificates for our products.