normal core body temperature during all three phases of orthopedic surgery — preoperative, intraoperative and postoperative.


| Clinical Area | Operating room, Postanesthesia care unit, Pre-op |
| Purposes | Patient warming |
| Mode of Operation | Continuous |
| Temperature Modes | Five settings:32℃,35℃,38℃,43℃, Ambient air |
| Time to Reach Operating Temperature | <5minutes(dependent on blanket model) |
| Airflow Modes | High:≥30CFM Med: ≥28CFM Low: ≥26CFM |
| Intake Filter | Yes |
| The Length of Hose | 2m |
| Audible/Visual Alarms | Under-Temp, Over-Temp,Fault |
| Interface | OLED Display |
| Noise | ≤52dB(High fan setting) |
| Power Cord | Hospital Grade Plug |
| Controller Dimensions: | Height: 33cm Width: 37cm Depth: 29cm |
| Controller Weight | 7.7kg |
| Power Supply | 220-240 VAC, 50/60 Hz |
| Shipping Case Dimensions | Height: 49 cm Width: 55cm Depth: 36cm |
| Shipping Case Weight | 9.9kg |
| Operating Conditions | Temperature: 5°C to 40°C Relative Humidity: 80% Maximum, non-condensing Atmospheric Pressure: 750 mbar to 1060 mbar |
| Transport & Storage Conditions | -20°C (-4°F) to 55° C (131°F) If the user suspects that the environment conditions for transport and storage have been exceeded, return the unit for service. |
| Blanket Type | Full Body Blanket , Full Underbody Blanket, Under body Blanket, Lower body Blanket, Surgical Access Blanket, Lithotomy Underbody Blanket, Pediatric Underbody Blanket, Multi-Access Blanket |

