This large flow submersible pump is designed for large-scale water supply, agricultural irrigation, industrial water transfer, water conservancy projects and large drainage applications.

This configuration is suitable for pumping systems requiring high flow and moderate head.

With a design flow rate of 600 m³/h, this submersible pump is intended for large-scale water transfer and drainage systems.

A flow rate of 600 m³/h is suitable for applications such as:

• Large-scale agricultural irrigation
• River water intake
• Reservoir water transfer
• Reservoir drainage
• Industrial water supply
• Industrial circulating water
• Municipal water supply and drainage
• Large aquaculture projects
• Construction dewatering
• Water conservancy projects

The pump is designed for a 28 m head, making it suitable for high-flow, moderate-head pumping systems.

The actual total dynamic head is not simply the vertical lifting height. It also includes friction losses and local losses throughout the piping system.

Total Head = Static Head + Pipeline Friction Loss + Local Losses

The pump body is manufactured from cast iron, providing good mechanical strength and structural stability.

Cast iron is widely used in large industrial pumps, irrigation pumps, water conservancy pumps and drainage pumps.

For clean water, river water and general irrigation water applications, cast iron is a commonly selected pump material that provides a practical balance between structural strength and project cost.

The impeller is one of the main hydraulic components of a water pump. This pump uses an SS304 stainless steel impeller, which provides better corrosion resistance than conventional cast iron impellers in many general water applications.

The SS304 impeller is suitable for applications including:

• Clean water pumping
• River water intake
• Agricultural irrigation
• Reservoir water supply
• Industrial water supply
• General circulating water systems

The pump is equipped with a 75kW 4-pole three-phase submersible motor.

3 Phase / 380V / 50Hz / 75kW / 4 Pole

The 4-pole motor configuration can be applied to specific large-flow pump operating conditions according to the hydraulic design of the pump and impeller.

• Large 600 m³/h Flow - Suitable for large-scale water transfer, irrigation and drainage projects
• 28 m Head - Designed for high-flow and moderate-head pumping applications
• 75kW 4-Pole Motor - Configured with a 75kW, 4-pole, 3-phase 380V 50Hz submersible motor
• Cast Iron Pump Body - Provides good structural strength for general water pumping applications
• SS304 Stainless Steel Impeller - Provides improved corrosion resistance for clean water applications
• Submersible Installation - Allows direct underwater installation and reduces space requirements