Waterproof Polystyrene EPS Cornice Moulding for Exterior & Ceiling Decor

Product Description:

When installing linear components, certain quality standards must be met to ensure that the construction effect meets the design requirements. Firstly, the surface flatness should be controlled within 3mm and checked with a 2m ruler. Secondly, the internal and external corners should be vertical and square, with a deviation of no more than 3mm. The verticality of the facade should also meet the standard, with a deviation of no more than 4mm. In addition, the height difference between adjacent components must be controlled within 1mm when docking. At the same time, there are clear requirements for the appearance quality of the installed components. The protective layer should be free of pinholes, ash residue, uniform thickness, and no exposed bottom, cracks, hollowing, or bubbles. Finally, the protective layer should also meet the standards of the coating finish base layer.

Features:

(1) EPS lines are firmly pasted, and EPS decorative lines are mainly bonded to walls with polymer mortar. Polymer mortar is made by mixing organic glue with inorganic material cement mortar, which has a long service life, strong bonding, and has national standards and specifications,

(2) It has been proven to be safe and reliable in a large number of engineering applications, thus avoiding the hidden dangers of anchor bolt fixing construction and anchor bolt corrosion, and completely solving the problems of external wall insulation cold and EPS line hot bridge.

(3) EPS line installation is simple, using special bonding materials and methods, one person can install and construct, especially for large-scale line projects, which only require bonding installation. The pattern effect is clear and natural, elegant and luxurious.

(4) There are no gaps between the EPS lines, and the EPS decorative lines are filled with the same gap filling material as the wall bonding. All gaps disappear and there will be no cracks in future use.

(5) EPS lines are environmentally friendly and use synthetic fibers as raw materials to meet the national standards for non-toxic and harmless green products in engineering decoration.

Technical Parameters:

FAQ: