Hydraulic Cable Tensioner With Cummins 4BT3.9 Engine Stringing Equipment
| Main technical performance | |
| Tension condition | |
| Deliver the two wires (or steel wires) at the same time | |
| Maximum discontinuous tension | 2×50KN |
| Maximum continuous tension | 2×40KN |
| Corresponding speed | 2.5Km/h |
| Maximum continuous payout speed | 5Km/h |
| Corresponding tension | 2X20KN |
| Deliver one wire (or steel wire) in two juxtaposed wheels | |
| Maximum continuous tension | 80KN |
| Corresponding speed | 2.5Km/h |
| Maximum continuous payout speed | 5Km/h |
| Corresponding tension | 40KN |
| Traction condition | |
| Maximum traction force | 40KN |
| Corresponding speed | 1.5Km/h |
| Maximum continuous payout speed | 5Km/h |
| Corresponding tension | 20KN |
| Deliver one wire or steel wire in two juxtaposed wheels | |
| Maximum tension | 80KN |
| Corresponding speed | 1.5Km/h |
| Maximum continuous payout speed | 5Km/h |
| Corresponding tension | 40KN |
| Structure Parameters | |
| Diameter of tensile force wheel | 1800mm |
| Concave-groove numbers | 5 |
| Maximum applicable diameter of wire | 40mm |
| Deadweight of the whole machine | 7800kg |
| Overall dimension (length, width, height) | 4900X2310X2900 |
| Slinging method | double point slinging |
| Engine | |
| Model | Cummins 4BT3.9 |
| Nominal speed | 2800r/min |
| Nominal power (1 hour) | 77KW |
