1. This Steel Wire Rope Disc Brush product that will be appreciated by both municipal companies and the industry dealing with cleaning work outside buildings, cleaning and renovating paving stones, taking care of the aesthetics of the surroundings.

2. Industrial companies with extensive facilities around which cleanliness must be maintained, municipal municipal companies taking care of areas in parks or squares, private companies offering cleaning services.

3. The Steel Wire Rope Disc Brush weeder will quickly and effectively remove grass, weeds and moss growing on paving stones, roadsides or sidewalks.

Where does this strength and power to work come from?

Steel Wire Rope Rotary Weeder Brush , weed brush OR500 is a machine powered by a gerotor hydraulic motor. The work of such motors consists in converting hydraulic energy produced by the pump into mechanical energy.

The Steel Wire Rope Rotary Weeder Brush has 2 hydraulic connectors, after finishing work they can be placed in special holders, thus maintaining order and aesthetics around the device. This machine is mounted on the rear three-point linkage Cat I and II and in case of having hydraulics at the front also on the front three-point linkage.

A wide range of adjustments gives you many possibilities!

The weeder has the option of manual adjustment (OS50) of the arm extension, as well as the option of lateral adjustment of the machine in 3 ranges. The weeder has 33 working tines with a length of 25 cm, which allow for work on an area with a working diameter of 50 cm. Additionally, this machine has an adjustable cover that protects against stones or chipping of small elements during work. The cover is adjustable in height and angle relative to the head.

The operation of the device, as well as the construction itself, is simple, which guarantees long and failure-free use.

It is not recommended to use the weeder to clean surfaces contaminated with waste such as: remnants of strings, threads, etc. Such contamination will cause them to get tangled in the brushes and consequently work less effectively. The weeder's construction is made of high-strength steel, protected with a durable paint coating.

*Too little oil flow in the tractor caused by the small diameter of the hydraulic lines (minimum 18) will significantly weaken the power of the weeder itself, so we will not use its full potential.