Product specifications

1. Cutting: the material will sent into the unit guide wheel

2.The material is leveled by three roller grinding machine and four roller grinding machine.

The diameter of forming shaft is Φ80mm (material # 45 will be quenched), the roll materials is GCR15,

quenched to HRC58 ° -62 °, surface is plated hard chrome .

3. Profiles: Profile Thickness: 2.0mm-4.0mm; width of profiles unfold: 482 mm; profiles Material: Q235

4. Punching: hydraulic punching (material Cr12 steel mold will be quenched, and it can be adjusted all around)

5. Cutting off: hydraulic shearing knife mold, materials:Cr12, quenching:HRC60-62

6. Host Power: 15KW

7. Cycloid reducer power: 15KW

8. Drive: Gear (high frequency hardened), 2-inch single row chain

9. Hydraulic station motor power: 15KW, pressure:20Mpa

10. The unit uses frequency conversion adjusting speed in 5m-10m / min

11. The electronic control part: PLC NC frequency electrical boxes, touch-screen. Counting by encoder,

can arbitrary control the length and the number of profiles,

Accuracy:± 1.0mm, automatic hydraulic shear, the system with punching center side hold machine and punching center hole machine.

12. Dimension of equipment: Length 18m ×Width 1.2m ×High 1.5m

The discharge of high-speed guardrail cold-roll forming machine:

Simple discharge rack:

1, The rack is made of 60mm * 40mm square tube welding (can be adjusted up and down).

2, The sliding wheel is arranged on the rack.

3. Specifications: Length 0.9m ×Width 1.5m × High 0.6m

Highway Guardrail Roll Forming Machine: mainly used for highway guardrail cold-roll forming plate,

guardrail products which it produced are high strength. According to customer demand, customer can custom

two or three waves, or other different specifications of cold-formed sheet .

Profile drawing and samples


Our advantage,

1.We can produce the cold roll forming machine according to customers final products and requirements.

2.We are focusing on the reputation.The after-sales service can be assured.Engineer are available to service machinery overseas.

After-sale Serive
-The seller take responsibility to installation and commissioning of the equipment and free training. After machine arrive the destination, by the request of the buyer , the seller will provide 1 technical engineer to guide installation and training , and the buyer should give the technical person with full cooperated.
-Installation period: about 5 days after the complete preparation by the buyer such as the foundation and all necessary accessories.
-Training time: 5 days.
-Before departure of the engineers from seller, the buyer should pay for installation and commissioning fee 100$/day to the point account of the seller. The two-way ticket,visa, food, hotel , the translator and insurance are all should provide by buyer with full responsibility.
-The seller supply technical data (including forming mould drawing, electrical elements drawing and equipment drawing etc.
)