Stainless steel cross clamps, vine climbing fasteners, steel wire rope and green wall grid fixing fixtures
Product Introduction
•Positioning and Drilling: Mark installation points on the wall, and drill holes with drill bits matching the wall material;
•Screw for fixation: Screw the complete set of self-tapping screws into the wall until the washers fit tightly against the wall to secure them in place;
•Threading the steel cable: Feed the stainless steel wire rope through the inner cavity of the front locking chuck;
•Adjust the spacing: rotate the nuts forward and backward to adjust the distance between the steel cable and the wall to an appropriate width;
•Locking and Fixing: Tighten the screw on the top of the chuck to lock the steel wire, and repeat the operation for multiple steel cables to complete the grid construction.

