ASTM A106 Gr.B Studded Tube with CS Fins for Economizers and Air Preheaters

An ASTM A106 Gr.B Studded Tube with CS (Carbon Steel) Fins is a specialized type of heat exchanger tube designed for high-efficiency heat transfer in demanding industrial applications. Here’s a detailed breakdown:

1. Base Tube: ASTM A106 Gr.B

(1) Chemical Composition (ASTM A106 Gr.B)

Notes:

Si (Silicon) improves oxidation resistance at high temps.

Low S/P reduces brittleness and improves weldability.

Mn enhances strength and hardenability.

(2) Mechanical Properties (ASTM A106 Gr.B)

Notes:

High tensile strength makes it suitable for high-pressure steam/water service.

Good ductility (≥20% elongation) prevents cracking during fabrication.

Hardness limit ensures weldability and machinability.

Key Applications Leveraging These Properties

• Studded/Finned Tubes: Relies on A106 Gr.B’s weldability for stud/fin attachment.
• Boiler Tubes: High yield strength resists steam pressure (up to 450°C).
• Refinery Piping: Mn/Si content aids oxidation resistance in flue gases.

2. Studded Design

Studs (pins) are resistance-welded onto the tube’s outer surface in a pattern (e.g., spiral, staggered).

Purpose:

Increases turbulence of flue gases/fluids, improving heat transfer.

Prevents ash/fouling buildup in dirty gas applications (e.g., waste heat recovery).

3. Carbon Steel (CS) Fins

Fins are helical or longitudinal strips welded or embedded to further boost surface area.

Why CS?

Cost-effective for non-corrosive environments (e.g., steam, air, flue gases).

Compatible with high-temperature industrial processes.

4. Key Features & Advantages

The ASTM A106 Gr.B Studded Tube with CS (Carbon Steel) Fins is commonly used in heat exchangers and boilers, particularly in applications requiring high-temperature and high-pressure resistance. Here are its key applications:

1. Heat Exchangers (Waste Heat Recovery, Economizers, Air Preheaters)

Used in power plants, refineries, and chemical processing industries to recover waste heat from flue gases.

The studs (pins) and fins enhance heat transfer efficiency by increasing the surface area.

2. Boilers (Water Tube & Fire Tube Boilers)

Suitable for high-pressure steam generation due to ASTM A106 Gr.B’s strength.

The studded design improves heat absorption from combustion gases.

3. Petrochemical & Oil Refining Industries

Used in furnaces, reformers, and cracking units where corrosion resistance and thermal efficiency are critical.

4. Air Coolers & Process Heaters

The finned design improves air-side heat transfer, making it ideal for cooling and heating applications.

Key Benefits:

• High Thermal Efficiency (due to studs & fins increasing surface area).
• High-Temperature & Pressure Resistance (ASTM A106 Gr.B is suitable for up to 450°C).
• Durability & Corrosion Resistance (CS fins provide cost-effective performance in non-extreme corrosive environments).

Industries Served:

• Power Generation
• Oil & Gas
• Chemical Processing
• Petrochemical
• Waste Heat Recovery Systems