Our cutting circular 430 round stainless steel plates feature a circular swirl brushed finish specifically designed for chemical processing and electric power industries. These pre-cut circular blanks eliminate material waste, reduce machining time, and ensure the brushed finish flows in perfect harmony with the circular geometry of your components.

Unlike conventional linear brushed finishes, our circular swirl pattern is specifically engineered for circular components. The abrasive process creates concentric or continuous spiral grain lines emanating from the center, providing both aesthetic appeal and functional advantages.

Grade 430 ferritic stainless steel offers optimal performance for chemical and electric power applications with its unique combination of properties:

• Oxidation resistance up to 800°C (intermittent) and 870°C (continuous)
• Excellent performance with nitric acid at moderate concentrations
• Resistance to organic acids including acetic, formic, and citric acids
• Superior atmospheric corrosion resistance in various environments

• Magnetic properties for easy mounting with magnetic fixtures
• 30% lower thermal expansion coefficient than 304 stainless
• Reduced thermal stress at joints and welds
• Cost-effective alternative to nickel-bearing grades

Our 430 circular swirl brushed plates accommodate diverse industrial requirements:

100mm to 1500mm with precision tolerances: ±0.5mm for diameters up to 500mm and ±1.0mm for larger diameters.

• 0.8mm - 1.5mm: Cover plates, instrument panels, non-structural components
• 2.0mm - 3.0mm: Standard flanges, inspection port covers, mounting bases
• 4.0mm - 6.0mm: Pressure-retaining flanges, vessel end closures, structural base plates

• Circular flanges for low-pressure nitric acid systems
• Manway and handhole covers for storage tanks
• Rotary valve discs and damper plates
• Instrument mounting plates and circular enclosures

• Transformer mounting plates and base flanges
• Generator end covers and access ports
• Switchgear enclosure components
• Flue gas sampling port covers
• Power boiler auxiliary equipment

Every circular plate undergoes rigorous inspection for dimensional accuracy, edge quality, and finish consistency. Positive Material Identification verifies 430 substrate composition, with full chemical and mechanical certification traceable to mill heat numbers.

Plates are protected with interleaving paper, edge-protected pallets, and peelable PVC film to maintain pristine condition through transit. Larger discs receive additional rigid backing to prevent flexing and maintain flatness.