10 X 40w 4in1 Led Beam Bar Wall Washer DMX Moving Head Lights With Led Pixel Control
【Features】
1. Each lamp bead can be controlled individually.
2. Unique honeycomb design lenses can bring a variety of dreamy effects.
3. Set light beam, effect and other uses and a suit.
4. Scan the position memory function, which can be automatically reset.
5. With fan heat dissipation and temperature automatic detection function, the system automatically stops working when the system detects too high temperature to protect the lamp.
6. Address code setting: built-in long-life battery can automatically charge, do not need to power on the lamp when setting the address code (optional)
【Specification】
POWER SUPPLY
Voltage:110-240V 50/60 Hz
Power consumption: 450W
LIGHT SOURCE
10x40w RGBW 4in1 Leds
Average life: 50,000 h
OPTICS
32bit 0-100% linear electronic dimmer
1-30Hz adjustable speed stop/strobe effect
EFFECTS SECTION
Moving tilt Beam+Beam pixel running
CONTROL AND PROGRAMMING
Channel models: 14CH/50CH
Display: LED display with 4 operating buttons
DMX signal connection: 3pin or 5pin in&out
DMX512, Auto run, Master/Slave, Sound active, with RDM
Power connection: Powercon in&out
Cooling:High efficiency die-cast aluminium, forced ventilation
MOVING BODY
Movement by means of 3 phase stepper motors, controlled by microprocessor.
Tilt movement: : 270°
Tilt Resolution: 16 bit
Working environment: -30~50℃
IP rate: IP20
WEIGHT&DIMENSION
N.G:15Kgs
Size:110*10*25cm
Wide Voltage | 110-240V 50/60 Hz |
Power | 450W |
LED Source | 10x40w RGBW 4in1 Leds |
Channel | 14/50 CH |
Dimming | 32bit 0-100% linear electronic dimmer |
IP RATE | IP20 |
Working temperature | -30-50°C |
Connection mode | DMX512, Auto run, Master/Slave, Sound active, with RDM |
Display | LED display with 4 operating buttons |
DMX signal connection | 3pin or 5pin in&out |
Product diemnsion | 110*10*25cm |
Packing size(2IN1) | 119*32*32CM |
N.W | 15KG |
【Packing list】
- 1 × LED BEAM BAR 1040
- 1 × Power cable
- 1 × DMX cable
- 1 × Safety rope
- 1 × User manual
【Cautions】
- Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching the wires!
- Unplug mains lead before opening the housing!
- To prevent fire or shock hazard,do not expose this fixture to rain or moisture!
- This fixture must be earthed!
- Do no try to repair it when the circuit is out of order, send it back to your supplier to repair!
【Product Description】







【Packing method】
Package:Carton or Flight case(the default package is carton,please contact us if need the flightcase)
【Shipping method】
By Air, sea, or Express(DHL, UPS, FedEx, etc) as request.