TP14 Series High frequency 15W Planar Transformer,High Frequency Power Transformer,Max. thickness 5.8mm
     
             This is a matrix of the winding configurations. They are ideally suited to hand between 10-15W of power supply on DC-CD converters application.
     
    FEATURES:
      	- Low-profile planar transformer
   	- High-power planar transformer
   	- High-frequency planar transformer
   	- PCB planar transformer
   	- Planar switching power transformer
   	- Off the shelf SMT planar transformer
   	- Very low Leakage Inductance (less than 0.2% for un-gapped cores).
   	- Cost effective and competitive prices.
   	- Minimum Electromagnetic Interference (EMI).
   	- High Creepage and Clearance distances between primary and
   	- Applicable to all SMPS topologies.
   	- Various mounting and terminals options (Horizontal, Vertical, Through-holes, SMT, Pins, Flying-cables and more).
   	- Specially designed heat-dissipating Clasps.
   
     
    APPLICATIONS:
      	- High efficiencies,high power density of 400 watts per cubic inch DC/DC converters.
   	- For forward, full-bridge, half-bridge and push-pull DC/DC converters.
   	- Input voltages between 18V and 75V, and output voltages from 18V down to 1.2V DC/DC converters.
   	- Telecommunications, industrial control systems,
   	- Automotive and heavy equipment vehicle systems
   
     
    TECHNICAL INFORMATION:
      	- The inductance is measured between Pin (1-2) at 100 kHz, 100 mVrms
   	- The leakage inductance is measured in primary winding Pin(1-2) with secondary winding shorted.
   	- All specifications typical at TA=25℃±5℃.
   
     
    
    
    
    