Raw materials 100% environment protection
SPC floor is mainly made with calcium powder, Resin and a kind of stabilizer, which is 100% environmental protection floor without any hazardous substance, like heavy metal or formaldehyde.
Thickness | 3.5mm,4mm,5mm,5.5mm,6mm | ||
Wear Layer | 0.3mm,0.5mm,0.7mm | ||
Dimensions | 184*1220mm(7″x48″) | 151*920mmm(6″x36″) | Customized |
Material | 100% virgin material | ||
Backing Layer | EVA,IXPE,Cork etc. | ||
Edge Detail | Squared edge & Beveled edge available | ||
Surface Treatment | UV coating | ||
Surface Texture | Wood grain | Flat grain | Deep embossing grain |
Impact grain | Hand-scraped grain | Light embossing grain | |
Feature | Formaldehyde Free | Waterproof | Strong Stability |
Varieties Design | Non-Slip | Fire proof | |
Installation | Easy Installation | DIY installation | Unilin Click |
Application | Indoor area,Decoration material,Office,Household,Hotel,Shoping center,School,Hospital,Residential and Commercial.... |
Click Here To Get Your Free Sample
Precautions Before Installation
· SPC floor should be leveled and placed on site with constant temperature and stability for 24 hours before installation;
· Make sure the floor is smooth and clean before installing the floor, without any residue;
· When installing the floor, the indoor temperature should be kept between 15 and 28 degrees Celsius.Indoor temperature and surface temperature 15 are appropriate, and should not be applied below 5 and above 30. The relative air humidity suitable for construction should be between 20% and 75%.
· The moisture content of the base layer should be less than 3%. The strength of the base layer should not be lower than the requirement of concrete strength C-20, otherwise suitable self-lev-eling should be used to strengthen the strength. The surface hardness of the base layer is not less than 1.2 MPa.