Specifications
| Size | 89(W)*25(D)*69(H)mm(excluding cables&connections) |
| Head Materials | SST,Nickel alloy*Epoxy adhesive(Direct contact with ink) |
| Compatible jetting fluids | Compatible with water,solvent,oil,UV curable inks |
| Nozzle plate surface | Coated SST |
| Nozzle spacing A:within a single row B:Within a color C:Single pass D:Row to row distance E:Color to color |
0.1693mm(1/150”) 0.0847mm(1/300”) 0.0423mm(1/600”) 0.55mm 11.811mm |
| Ink inlet port | 2*dual ports |
| Piezo type | D33 stacked PZT |
| Drop ejection mode | Piston pusher with metallic diaphragm plate |
| Integrated electronics | Low-voltage serial to high-voltage parallel converter; 3-bit shift resistors;transmission gate outputs |
| Temperature control | Integrated heater and thermistor |
| Viscosity | 11 CP(at operating temp) |
| Surface tension | 32 dynes/cm |
| Native drop volume | 7 pico-liter |
| Drop volume range/variation | 7-35 pico-liter with grey-scale/±10% |
| Drop velocity nominal/variation |
7 m/sec/±15% |
| Crosstalk | 10% or less with all channels firing |
| Jet straightness 1 sigma | <3.5 milli-radian from nozzle centerline |
| Native drop operating frequency | 60kHz(Higher burst possible under ideal condition) |
| Life | 100 billion actuation’s per nozzle |

