300LStainless steel Simple operation Solvent Distillation MachineRecycling of dirty solvents such as ethanol, IPA, and NMP

Do you also have these problems?

"Are you currently mainly entrusting a third party to handle these wastes? Are the costs of transportation and incineration rising year by year?"

缺少产品细节图

Product Parameters

Features

300L solvent recovery machine is an efficient and safe industrial environmental protection equipment. Its core features can be summarized into the following five aspects:

I. Efficient recovery and performance parameters
1. Processing capacity and efficiency
(1) Recovery rate: nominally up to 95% (ratio of recovered solvent to solvent content in waste liquid), calculated as a conservative value of 80% in actual application.
(2) Operation cycle: average processing time per batch is about 3 hours (depending on solvent type, concentration and impurity content), and multiple batches can be completed per day.
(3) Cooling method: air-cooled condensation system is adopted, no external cooling water is required, reducing operation and maintenance complexity.
. Precise temperature control and energy consumption
(1) Precise temperature control: heating temperature range 50–200°C, steam temperature setting 0–200°C, supporting precise control of solvents with different boiling points.
(2) Low power consumption design: recovery is completed in advance, and the machine will be shut down in time to reduce power consumption.

2. Safety protection design
1. Multiple safety protection mechanisms
(1) Double shutdown protection: supports fixed temperature shutdown (steam temperature trigger) and timed shutdown to avoid overheating risks

(2) Pressure control: Built-in pressure relief device, when the pressure is too high, it will automatically release the pressure and stop the machine at the same time.

3. Customization options
1. Function expansion
(1) Optional pneumatic feeding pump, vacuum decompression device (accelerated distillation), high-temperature recovery bag, etc.35.
(2) The inner wall of the barrel tank can be coated with Teflon coating to enhance anti-adhesion
2. Flexible adaptation needs
(1) Capacity customization: supports large-capacity models such as 250L and 450L.
(2) Cooling system: air cooling can be changed to water cooling (suitable for high temperature environment).

A variety of models to meet different needs

Recyclable solvent types:

I. Halogenated Solvents
1,Chlorinated Solvents

a.Methylene Chloride (Dichloromethane)

b.Chloroform

c.Carbon Tetrachloride

d.Trichloroethylene (TCE)

e.Perchloroethylene (PCE)

II. Non-Halogenated Hydrocarbon Solvents
1,Aliphatic Hydrocarbons

a.Hexane

b.Heptane

c.Mineral Spirits

2,Aromatic Hydrocarbons

a.Toluene

b.Xylene

c.Benzene (requires strict safety controls)

III. Oxygenated Solvents
1,Ketones

a.

b.Methyl Ethyl Ketone (MEK)

c.Methyl Isobutyl Ketone (MIBK)

2,Alcohols

a.Isopropyl Alcohol (IPA)

b.Ethanol

c.Methanol

3,Esters

a.Ethyl Acetate

b.Butyl Acetate

IV. Specialty Solvents
a.Tetrahydrofuran (THF)

b.Dimethylformamide (DMF)

c.Dimethyl Sulfoxide (DMSO)

d.Acetonitrile

Key Considerations:

Material Compatibility

Ensure seals/piping resist solvent corrosion (e.g., fluoropolymers for aggressive chemicals).

Azeotrope Handling

Mixtures (e.g., IPA/water) may require tailored distillation parameters.

Prohibited Solvents
⚠️ Peroxides-forming solvents
⚠️ Strong acids/bases (e.g., conc. HCl, NaOH)
⚠️ Pyrophoric substances(e.g.,Nitro)

Always consult equipment specifications and MSDS prior to processing.

Recycling display

After the dirty solvent is processed by the solvent recovery equipment, clean solvent and remaining residue are obtained. The example diagram is as follows:

Real photos of cooperative industry cases

Factory

Qualifications

Looking forward to meeting you...