RHINO700-EC6 Solar Panel Cleaning Robot
The RHINO700-EC6 Remote-Controlled Crawler Solar Panel Cleaner is equipped with two adaptive extra-wide floating roller brushes—one placed at the front and the other fixed at the rear. These brushes maintain non-interrupted contact with solar module surfaces, thus providing thorough cleaning results with no streaks remaining. An intelligent parking and storage function is integrated into the robot; this not only avoids brush warping but also extends the device’s working life. Furthermore, the robot’s built-in anti-fall system improves operational safety: it enables the robot to operate steadily even when traveling across complex terrains, which further makes solar panel cleaning safer, more efficient, and less dependent on manual work.
| Technical Specifications | |
| Working Mode | Dry Cleaning/Wet Cleaning |
| Travel Speed | ≤ 0.4 m/s, adjustable |
| Daily Cleaning Capacity (8h) | 1.2 MW |
| Wind Resistance Rating | ≤ Level 7 |
| Operating Temperature | 0ºC ~ 50ºC |
| Operating Humidity | 0 - 95% (non-condensing) |
| Dimensions | 63cm 52cm 18cm |
| Roller Brush Dimensions | 140cm*27cm*19cm (Front)/140cm*23cm*19cm (Rear) |
| Cleaning Width | 1.3m |
| Brush Hair Material | Nylon |
| Battery Type | Portable lithium battery, 24V 30AH |
| Endurance | ≥4h |
| Charging Time | 8h (Standard Charge) / 4h (Fast Charge) |
| Pipe Length | 20m |


