SOCAY SOP-8L Package High Voltage Ringing SLIC Protector TISP61089B Thyristor Surge Suppressors (TSS) VF 3V
DATASHEET: TISP61089B_v2108.1.pdf
| Parameter | Symbol | Value | Unit | |
| Non-repetitive peak on-state pulse current | 10/1000μs | IPPSM | 30 | A |
| (Telcordia (Bellcore) GR-1089-CORE, Issue 3) | ||||
| 5/310μs | 40 | |||
| (ITU-T K.20, K.21& K.45, K.44 open-circuit voltage wave shape 10/700 µs) | ||||
| 2/10μs | 120 | |||
| (Telcordia (Bellcore) GR-1089-CORE, Issue 3) | ||||
| Non repetitive peak on-state current (sinusoidal) 60Hz | 0.1s | ITSM | 6.5 | A |
| 1s | 4.5 | |||
| 5s | 2.4 | |||
| 30s | 1.3 | |||
| 900s | 0.72 | |||
| Repetitive peak off-state voltage, VGK=0 | VDRM | -170 | V | |
| Repetitive peak gate-cathode voltage, VKA=0 | VGKRM | -167 | V | |
| Operating free-air temperature range | TA | -40~+85 | ℃ | |
| Storage temperature range | TSTG | -40~+150 | ℃ | |
| Junction temperature | TJ | -40~+150 | ℃ | |
| Maximum lead temperature for soldering during 10s | TL | 260 | ℃ | |
| Junction to free air thermal resistance | RBJA | 120 | ℃/W | |
| Parameter | Symbol | Test Conditions | Min. | Typ. | Max. | Unit |
| Forward Voltage | VF | IF = 5A, tW = 200μs | -- | -- | 3 | V |
| Impulse peak forward recovery voltage | VFRM | 2/10μs, IF = 100A, RS = 50Ω, di/dt = 80A/μs | -- | -- | 10 | V |
| Off-state Current | ID | VD = -170V, VGK = 0, TJ = 25℃ | -- | -- | -5 | μA |
| VD = -170V, VGK = 0, TJ = 85℃ | ||||||
| Impulse breakover voltage | V(BO) | 2/10μs, ITM = 100A, RS = 50Ω | -- | -- | -112 | V |
| di/dt = -80A/μs, VGG = -100V | ||||||
| Holding current | IH | IT = -1A, di/dt = 1A/ms, VGG = -100V | -150 | -- | -- | mA |
| Gate reverse current | IGAS | VGG = VGK = -167V, VKA = 0, TJ = 25℃ | -- | -- | -5 | μA |
| VGG = VGK = -167V, VKA = 0, TJ = 85℃ | ||||||
| Gate trigger current | IGT | IT = 3A, tp(g) ≥ 20μs, VGG = -100V | -- | -- | 5 | mA |
| Gate trigger voltage | VGT | IT = 3A, tp(g) ≥ 20μs, VGG = -100V | -- | -- | 2.5 | V |
| Anode-cathode off-state capacitance | CKA | f = 1MHz,VD = 1V, IG = 0, VD = -3V | -- | -- | 110 | pF |
| f = 1MHz,VD = 1V, IG = 0, VD = -48V | -- | -- | 55 |
Description:
This device is especially designed to protect Subscriber Line Interface Circuit (SLIC) against transient overvoltage. Positive overloads are clipped with 2 diodes. Negative surges are suppressed by 2 Thyristors, their breakdown voltage being referenced to VBAT through the gate. This component presents a very low gate triggering current and minimizes overvoltage stress on the SLIC.
Features:
|
Applications:
|
| Device | Package | Shipping |
| TISP61089B | SOP-8L | 3000 PCS/Reel&Tape |
