39,000 CPH(Optimum)

1 Gantry x 10 Spindles/Head

Applicable Parts : 0402(01005 inch) ~ 42mm(H15mm)

Applicable PCB : 460(L) x 400(W)(Standard) Max. 740(L) x 460(W)(Option)

High Speed, High Precision and Electrically Driven Feeder

• Automatic pick-up position alignment function
• Compatible with SM pneumatic feeders

New Vacuum System and Optimized Pickup/ Placement Motion

SMART Feeder

• World's first Auto Loading and Auto Splicing

Fresh Energy in Your Business

Applies a New Vacuum System

July. 2013

Advanced High Speed Flexible Mounter

Part Polarity Recognition BGA and CSP Recognition

Realizes the highest placement speed among the same class chip placers by applying a new flying head mechanism with 10 spindles as well as optimized pickup/placement motion

Since it allows part recognition without stopping after part pickup by applying its original On-the-Fly image recognition technology, the SM481 model maximizes the part placement speed by minimizing the time to move between the pickup position and placement position and by reducing the recognition time to almost zero.

Realizes Super-high Placement Speed of 39,000 CPH

Placement accuracy correction system

Chip ±50μm(Cpk ≥1.0)

The newly upgraded placement accuracy calibration system automatically checks and corrects the pickup point offset, head offset, C/V offset, etc. to allow reliable part placement.

Absolute Accuracy of±50μm(Cpk 1)

Electrically Driven High Speed and High Precision Feeder

• Electrically driven SM feeder
• Allows integrated use of 0603/2P/4P
• Equipped with a function to automatically align the pickup position between feeders to improve the simultaneous pickup rate.
• Able to set various part supply speeds to improve the stability of part supply.
• Automatic feeding pitch recognition function
• Compatible with SM pneumatic feeders
• SM smart feeder
• The world's first feeder equipped with Auto Splicing and Auto Loading functions
• Maximizes work convenience and actual productivity by automating the splicing process for part reel replacement normally performed by hand.

Minimized delay of part placement due to optimization of pneumatic path

Realizes stabilized part pickup and minimized air consumption by applying a vacuum pump

Reinforced Applicability to Parts and PCBs

Applies a New Illumination System

• Applicable to parts from 0402(01005 inch) to 42mm(H15mm) as well as BGA/CSP parts
• Applicable to Max. 740(L) x 460(W) PCBs for long boards applied to LEDs and displays
• Supports automatic recognition of the entire pickup position by being equipped with a fiducial camera at the left and right respectively

Reinforced applicability to odd-shaped parts including BGA, CSP, etc., by applying three-staged illumination systems(Side, Coaxial and Outer illumination).