Model Number:

ZYX-21745GT

Place of Origin:

Shenzhen, China

Base Material:

PI

Brand Name:

BQZYX+

Copper Thickness:

1oz

Board Thickness:

0.15mm

Min. Hole Size:

0.1mm

Min. Line Width:

0.1mm

Min. Line Spacing:

0.1mm

Surface Finishing:

Immersion Gold

Solder Mask:

Yellow

Silkscreen:

White/Black

Test:

Flying Probe/Test-rig

Service:

OEM PCB

Items

Fabrication Capabilities

Remarks

Layer Count

1-10 layers

if your PCB order is over 10 layers, please contact your customer service for quotation.

Material

FR-4 94V0/ Aluminum

For FPC, HDI, ROGERS, HALOGEN-FREE, HIGH TG ETC., contact your customer service.

Maximum Size

500x1100mm

The max. size of PCBGOGO PCB is 50*40cm. and we accept longer PCB board which max. length is 1100MM

Minimum Size

3mm*3mm

Maximum Panel Size

50cm*45cm

Minimum Panel Size

7.5*7.5cm

If you need v-cut, this is minimum panel size in PCBGOGO

Tolerance Size of Board
(Outline)

±0.2mm

CNC tolerance is ±0.2mm, v-cut tolerance is ±0.5mm

Board Thickness

0.4-2.4mm

Tolerance Thickness of Board
( t≥1.0mm)

±10%

Pay attention: as the capability (PTH, solder mask and others) will add the board thickness, we usually use Plus Tolerance.

Tolerance Thickness of Board
( t≥1.0mm)

±0.1mm

Pay attention: as the capability (PTH, solder mask and others) will add the board thickness, we usually use Plus Tolerance.

Min. Line Width

4mil(0.1mm)

Min. Line Width is 0.1mm;In terms of multi-layer PCBs, Min. Line Width for inner-layer is 0.175mm

0.1mm/4mil for outer layer. If the minimum line width is less than 6 mil, there will be an extra charge / fee.

Min. Line Space

4mil(0.1mm)

Min. Line Spacing is 0.15mm/6mil. If Min. Line Spacing is less than 6mil, it will charge extra fee.

Outer Layer Copper Thickness

35um/70um/105um
(1OZ/2OZ/3OZ)

It means the thickness of copper in outer layer. 1 OZ=35um, 2OZ=70um, 3OZ=105um.

Inner Layer Copper Thickness

35um/50um
(1OZ/1.5OZ)

Default is 1 OZ, but if you have special requirement, 1.5 OZ is acceptable.

Drill Diameter Range

0.2-6.3mm

Min. Size of drill via CNC is 0.2mm. 6.3mm is maximum size.

Annular Ring

≥0.1mm(4mil)

If Annular Ring is smaller but there is enough space, there is no limit for the Annular Ring size. But if there is not enough
space coupled with dense lines, the Annular Ring size should be over 0.1mm

Finished Hole Size

0.2--6.20mm

Because the copper will cover the surface of hole, the Finished hole size is smaller than it is in Gerber file

The Size Tolerance of Finished
Hole (CNC

±0.08mm

Tolerance of Finished Hole Size is ±0.08mm. For example, if the drill in the Gerber file is 0.6mm, the finished drill will be
0.52-0.68mm on standard.

Solder Mask Type

LPI

LPI is common use in the PCB fabrication.

Min. Width of Legend

≥0.15mm

Min. width of legend is 0.15mm, if it is smaller, the legend in the finished board will be not clear.

Minimum Height of Legend

≥0.8mm

Min. height of Legend is 0.8mm, if it is smaller, the legend in the finished board will be not clear

Legend Width/ Height

1:5

The suitable proportion of width and height is good for PCB fabrication.

Space between Trace and
Board Edge

≥0.3mm(12mil)

Routing: the space between line and frame should be over 0.3mm. V-cut panel: the space between line and v-cut line should be over
0.4mm.

Panelization

V-scoring, Tab-routing,
Tab-routing with Perforation
(Stamp Holes)

Leave min clearance of 1.6mm between boards for break-routing. For V-score panelization, set the space between boards to be zero.

Min. aperture in half-hole
technology

0.6mm

Half-hole is a special technology and the min. aperture must be over 0.6 mm