2400L Ultrasonic Bath

Application:

Jewelry, diamond, wedding ring, necklace, earring, body jewelry, body piercing, clock & watches, eyeglasses, contact lens, dentures, table-ware, printer inkjet, seal and comb, toothbrush, baby feeder, baby nipple, etc.and all your small things.

Specificatoin:

Product description:

2500ml digital ultrasonic cleaner, ultrasonic jewelry cleaning machine

JP-1360ST with 5 intervals times adjustable

Having great effect of sterilizing and cleaning

Home used mini ultrasonic cleaner

Features

• It presents the capacity of 2500ml.
• Ideal for cleaning spectacles, jewelry, dentures & Braces, cleaning watches and many more to maintain hygiene.
• Presents a gentle cleaning method with a high cleaning frequency of 40KHz normally with a cleaning power of 70W.
• Presents a stainless steel tank to use the cleaning fluid to clean the items at high frequency.
• It vibrates at a high frequency to remove the dirt from the smallest and inaccessible particles.
• Has a fine quality mesh basket for safe cleaning

Images of this model:

How does Ultrasonic Cleaner work?

Suggested Ultrasonic Cleaning Procedure

In all cases manufacturers’ instructions should be followed when using an ultrasonic cleaning process. These are representative steps.

Fill the ultrasonic cleaning tank with an approved medical instrument cleaning solution such as CLN-LR012 available from Tovatech following dilution instructions provided. Turn the cleaner on to start the degassing process. This step removes entrained air in new solutions that interferes with the efficiency of cavitation and takes approximately 10 minutes.

In the meantime:

• Segregate instruments by alloy or composition to avoid potential damage (Chromium plated instruments should not be cleaned ultrasonically)
• Instruments with movable parts should be disassembled to facilitate cleaning
• Place the instruments the ultrasonic cleaner’s mesh basket, taking care that they do not come in contact with each other
• Cannulated or lumened instruments should be positioned to insure interiors are wetted with the cleaning solution. In some instances placing them on an angle will facilitate this
• Set the control panel per manufacturers’ instructions and start the cleaning process

At the end of the cycle, remove the instruments from the ultrasonic cleaning bath and thoroughly rinse them to remove all traces of the cleaning solution. Deionized water rinses will avoid spotting. If the instruments are not to be immediately disinfected and sterilized be certain that they are thoroughly dried and protected. Part reassembly can occur after sterilization.

Procedures should be in place to guide the replacement of used ultrasonic cleaning solutions. In some instances it is recommended that solution be drained and tanks thoroughly cleaned and dried after each ultrasonic cleaning cycle. Most solutions available today are biodegradable, which facilitates disposal but local authorities should be consulted on proper practices.