MachineU > China Products > Electrical Equipment & Supplies > Industrial Controls > Other Electrical Equipment
IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment
IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment
IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment
IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment
IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment
IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment
IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment
IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment
Specifications
Brand Name :
Sinuo
Model Number :
SN9929
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Customized
Payment Terms :
T/T
Supply Ability :
15 Sets per Month
Delivery Time :
30 days
Packaging Details :
Plywood Case
Sandbag weight :
100kg/Bag
Control method :
Automatic lifting
Test net naterial :
Polyester fiber
Test net size :
Diameter of 1mm
Net load capacity :
5～500 (KG)
Load weights type :
Steel load set
Material :
Polyester fiber
Warranty :
Free warranty
Description

IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment

Product information:

This device meets the standards of IEC60598-2-3:2011 clause 3.6.3.1, figure 1 IEC60598-2-5 clause 5.6.5.

It used to detect the static load test of wind resistance for street lamps outdoors.

Test principle:

The working principle is to use a small sandbag to spread evenly on the road lamp under test, or use a net to cover the lamp, and then test the load on the net. This device is suitable for road lampshade wind-force test, equipped with sandbags, test nets, test weights, installation of test bracket, and etc.

Technical parameters:

Wind-force simulation sandbag 100kg/Bag, built-in steel ball (adjustable with various weights), two bags (small sandbags according to the test, 20 small bags with various specifications).
Control method automatic lifting console operation
Test net diameter of 1mm;load weight : 5～500 (KG);material: Polyester fiber; Convenient hook
Load weights Steel load set, chrome plated surface
Equipment bracket SUS304 stainless steel, can bear 300KG load, equipped with a variety of different street lights, tunnel light fixtures and street lamp holders, can be replaced.

Test According To Standard:

1. IEC60598-2-3:2011 clause 3.6.3.1 test

Calculate the load applied to the lamp according to the formula.

IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment

Set test time 10min.

Press the start button to start the measurement, the disc on the right falls off the load and starts timing, and when the time is up, the disc rises to lift the load.

After the test is completed, there should be no visible damage that compromises safety, the permanent deformation of the attachment should not exceed a slope of 2 cm/m, and there should be no rotation around the attachment.

2. IEC60598-2-5 clause 5.6.5 test

For floodlights used above ground outdoors, a constant, evenly distributed load was applied to the floodlights for 10 minutes using sandbags, which provided a floodlight area of 2.4KN per square meter.

Set test time 10min.

Press the start button to start the measurement, the disc on the right falls off the load and starts timing, and when the time is up, the disc rises to lift the load.

Place the floodlight on a vertical plane, rotate 180° around the attachment point, and repeat the test.

During the test, there shall be no failure or movement in the vicinity of the connection point, and no permanent deformation of more than 1° after any part of the test.

IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment

IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment

IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment

Send your message to this supplier
Send Now

IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment

Ask Latest Price
Watch Video
Product Detail
Brand Name :
Sinuo
Model Number :
SN9929
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
Customized
Contact Supplier
video
IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment
IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment
IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment
IEC 60598-2-3 Static Load Test For Post-Top Mounted Luminaires Testing Equipment

Sinuo Testing Equipment Co. , Limited

Verified Supplier
7 Years
guangdong, guangzhou
Business Type :
Manufacturer
Main Products :
Electrical Appliance Testing Equipment, Energy Efficiency Lab, Vehicle Testing Equipment
Total Annual :
800000-1500000
Employee Number :
30~50
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Led Testing Equipment
MachineU China Products Electrical Equipment & Supplies Industrial Controls Other Electrical Equipment
Contact Supplier
Submit Requirement