MachineU > China Products > Electrical Equipment & Supplies
IEC 62196-1 Electric Vehicle Rewire - Able Mechanical Strength Tester
IEC 62196-1 Electric Vehicle Rewire - Able Mechanical Strength Tester
IEC 62196-1 Electric Vehicle Rewire - Able Mechanical Strength Tester
IEC 62196-1 Electric Vehicle Rewire - Able Mechanical Strength Tester
IEC 62196-1 Electric Vehicle Rewire - Able Mechanical Strength Tester
IEC 62196-1 Electric Vehicle Rewire - Able Mechanical Strength Tester
IEC 62196-1 Electric Vehicle Rewire - Able Mechanical Strength Tester
IEC 62196-1 Electric Vehicle Rewire - Able Mechanical Strength Tester
Specifications
Brand Name :
Sinuo
Model Number :
SNQC11014
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
negotiation
Delivery Time :
5days
Applied Standard :
IEC 62196-1Ed.4
The height of dropping :
1000mm
Dropping times :
8
Rotating device :
45°, it can be rotated in all sides
Size :
L*W*H 2300*500*860mm
Clause: :
CDV 2020 clause 26.3, fig 19.
Description

Rewire-able Plugs and Vehicle Connector Mechanical Strength Tester

Product information:

This testing device is required by IEC 62196-1Ed.4CDV 2020 clause 26.3, fig 19.

It is used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable.

Test principle: The free end of the cable and an additional rope or other flexible means, etc., attached to the flexible cable, both having a total length of 2,25 m, is fixed to a wall at a height of 1 m above the floor.

The sample is held so that the cable is horizontal and then it is allowed to fall on to a concrete floor. This is done eight times; the cable being rotated through 45° at its fixing each time.

Rewirable plugs and vehicle connectors are fitted with a small section (approximately 200 mm) of the lightest type of flexible cable of the smallest cross-sectional area recommended by the manufacturer.

The sample is held so that the cable is horizontal and then it is allowed to fall on to a concrete floor. This is done eight times; the cable being rotated through 45 ° at its fixing each time.
After the test, the samples shall show no damage within the meaning of IEC 62196-1Ed.4CDV 2020; in particular, no part shall have become detached or loosened. The samples shall not expose parts likely to become live. The samples shall maintain their IP rating.
Accessories with a degree of protection IP44 and higher shall withstand the relevant test specified in IEC 62196-1Ed.4CDV 2020 clause 20.
Accessories with enclosures of thermoplastic material shall withstand the test of IEC 62196-1Ed.4CDV 2020 clause 21.4.

Technical Parameters:

The height of dropping 1000mm
Dropping times 8
Rotating device 45°, it can be rotated in all sides.
Size 2300*500*860mm

Product tags

electric motor load testing equipment

,

electrical load tester

,

auto electrical tester
Send your message to this supplier
Send Now

IEC 62196-1 Electric Vehicle Rewire - Able Mechanical Strength Tester

Ask Latest Price
Product Detail
Brand Name :
Sinuo
Model Number :
SNQC11014
Certification :
Calibration Certificate (Cost Additional)
Place of Origin :
China
MOQ :
1
Price :
negotiation
Contact Supplier
IEC 62196-1 Electric Vehicle Rewire - Able Mechanical Strength Tester
IEC 62196-1 Electric Vehicle Rewire - Able Mechanical Strength Tester
IEC 62196-1 Electric Vehicle Rewire - Able Mechanical Strength Tester
IEC 62196-1 Electric Vehicle Rewire - Able Mechanical Strength Tester

Sinuo Testing Equipment Co. , Limited

Verified Supplier
7 Years
guangdong, guangzhou
Business Type :
Manufacturer
Main Products :
Electrical Appliance Testing Equipment, Energy Efficiency Lab, Vehicle Testing Equipment
Total Annual :
800000-1500000
Employee Number :
30~50
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Vehicle Testing Equipment
MachineU China Products Electrical Equipment & Supplies
Contact Supplier
Submit Requirement