Sino DRO SDS3MS Lathe Milling Machine DRO Digital Readout TTL Input AC110V/220V​

DRO SDS2MS is a multipurpose gauge with a 3-coordinate numerical display.
This gauge can change to the appropriate function using a different machine tool simply by altering the parameters.

Digital readout settings for the SINO SDS3MS

1. AC to DC voltage range 50 Hz to 60 Hz/85 v to 250 v
2. 15 watts of power used: 25 volts

3. Make the number coordinates: a coordinate, two coordinates, and three coordinates.
4. Demonstrate utilizing eight meters words and exhibit symbols that signed seven displays (two or three axes) produce data information.
5. 2 kg in weight
6. The input signal is TTL, an easy-to-use interface with a programmable controller, and an EIA-422 open collector output signal.
7. Permit an input signal frequency more than 100 KHz
In order to link a resolution: 10 microns, 5 microns, 2 microns, 1 micrometer, and 0.5 microns

Digital display table advantages:

1, professional design, beautiful appearance generous, counts the frequency response is fast and powerful.
2, die-casting alloy shell, the surface electric pensu processing, dustproof wear-resisting, good shielding.
3, professional design, independent power supply, to adapt to the range, high stability, strong anti-jamming capability.
4, power supply and signal anti-interference ability, high quality and durable panel of buttons, change is simple and convenient.
5, directly on the digital display table for functional operation functions such as sine, cosine, tangent function, convenient processing.
6, can be in the X and Y direction for automatic tool compensation
7, RS - 232 - C interface can be connected to the PC and PLC is used in all kinds of automatic mechanism of displacement measurement.

Product image /photos:

The rack in the picture is optioned, not standard product.