MachineU > China Products > Machinery > Environmental Machinery > Water Treatment Machinery
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Specifications
Packaging Details :
Standard export packaging
Supply Ability :
1500000 Piece/Pieces per Month
Price :
CN¥4,855.09/pieces >=1 pieces
MOQ :
1
Brand Name :
SINOMEMB
Model Number :
SNU-HO-2-T865
Place of Origin :
China
Certification :
NSF
Product name :
Industrial Ultrafiltration Membrane
Shape :
Cylinder
Material :
PVDF
Designed Water Flow :
0.2~5 T/ H
Pore Size :
0.01-0.1 microns
Warranty :
1 YEAR
Mwco (Molecular Weight Cut Off) :
1,000-500,000 Daltons
Flow Configuration :
Outside-in
Description

The core SINOMEMB ® series SN U-HO- 2880 hollow fiber UF membrane element is suitable for systems

with a capacity of more than 50 m 3 /hr (220gpm) . Longer module length, larger effective membrane area, and
higher packing density make it the module with the highest effective membrane area among SINOMEMB® series
UF modules , which can be widely used in surface water, well water, seawater , industrial wastewater and sewage
secondary , tertiary treatment and other water treatment applications .

Ø Membrane element specifications

Membrane element model

Effective membrane area

ft 2 (m 2 )

Effective volume

G( L )

weight empty /full of water

( kg )
SN U-HO-2- T 880 862(80) 11(42) 70/105
Inlet size Water outlet size Concentrated water outlet size Membrane Polymer
DN50 DN50 DN50 PVDF
Membrane inner diameter/outer diameter (mm) Filtration precision (μ m ) shell material Sealant material
0.7/1.3 0.03 U-PVC epoxy resin

Ø Membrane element operating parameters

Filtration flux ( 25℃ ) L/㎡·hr 40-90
Flow range ( 25℃ ) m³/hr 3.2-7.2
Maximum influent turbidity (NTU) ≤100
Maximum resistance to residual chlorine (NaCLO) (ppm) Continuous: 200; Momentary: 5000
Maximum anti-suspended solid capacity (ppm) ≤100
Maximum influent COD (ppm) 100
Working temperature (℃) 15-40
pH range 2-12
Maximum water production (L/m³·h) 150
Maximum water inlet pressure ( 20°C ) (Mpa) 0.3
Maximum transmembrane pressure difference (Mpa) 0.2
Maximum backwash pressure (Mpa) 0.25
Maximum air flushing flow rate (Nm³/hr) 10-18
General backwash cycle (min) 15-60
General backwash time (sec) 30-60
General backwash flow rate (L/m³·h) 180-320
General chemical enhanced backwash cycle (day) 1-15
General chemical backwashing time (min) 1-15
General chemical cleaning cycle (day) 30-180
General chemical cleaning time (min) 90-480
General chemical cleaning chemicals NaClO or H2O2 20 00ppm , NaOH (PH≤10), HCl ( PH≥2 )
How to run /operate outside-in / full flow or cross flow filtration
Expected water production SDI ≤3
Expected product water turbidity NTU ≤0.1
Bacteria removal rate (log) >3
E. coli removal rate (log) >6
service life ≥3 years under standard conditions

Ø Membrane element size

L L1 L2 L3 L4 Diameter Φ air intake
2360mm 2000mm 2130mm 2320mm 180mm 225mm RP 3/8”
(92.9)in (78.7)in (83.9)in (91.3)in (7.1)in (8.9)in /
 Membrane element operation guide
During the operation of the UF system, it is necessary to avoid sudden changes in pressure during system
start-up, shutdown, operation, cleaning, maintenance, etc., as well as exceeding the maximum withstand pressure
specified in this manual, to prevent possible membrane breakage, sealing, etc. End fall off, membrane shell
cracking and other serious damage consequences; this series of products have been treated with anti-corrosion and
membrane wire protection before leaving the factory, and the inner membrane wire of the module is in a semi-dry
state. For manual operation, the water production rate should be set to 50% of the design water production rate, and
the initial water production must be discharged directly and cannot be used as product water.
 Membrane element product usage tips
The normal start-up and normal cleaning and maintenance of the UF system are the key to ensure the long-term
normal use of membrane products. Before starting the system, it should be ensured that the parameters of each
valve, instrument, pre-processing equipment, signal transmission equipment, power equipment, etc. meet the design
specifications and requirements, so as to ensure the safe, stable and up-to-standard operation of the overall system.
Please refer to the product technical manual for the debugging and testing work of the system in the early stage.
 Disclaimer
Failure to operate in strict accordance with the operating limits and guidelines set forth herein voids our limited
warranty. If the UF system is out of service, please inject protective liquid inside the membrane module for
anti-corrosion treatment, so as to avoid the increase of maintenance cost caused by the large number of
microorganisms in the system.

Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Products Description
product name
Industrial Ultrafiltration Membrane
Model
UF-2880
Product Size
2360*180mm
Working type
out-inside
material
PVDF
CBM
0.28
G.W(kgs)
38.0
N.W(kgs)
35.0
main effect
water purification system
apply to
Residential reverse osmosis membrane
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Q:How is SINOMEMB membrane different from others? A:We offer value against your money, prices which are comparatively lower, performance equivalent to best membranes available and with higher longevity. Q:Are you a manufacturer? A.Yes,we have been in providing the professional products in wire mesh field for more than 10 years. Q:How about the delivery time? A:Usually within7-10days,customized order may need longer time.

Send your message to this supplier
Send Now

Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications

Ask Latest Price
Watch Video
Product Detail
Packaging Details :
Standard export packaging
Supply Ability :
1500000 Piece/Pieces per Month
Price :
CN¥4,855.09/pieces >=1 pieces
MOQ :
1
Brand Name :
SINOMEMB
Model Number :
SNU-HO-2-T865
Contact Supplier
video
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications

Sinomemb Environment Technology (beijing) Co.,

Verified Supplier
1 Years
beijing, beijing
Since 2016
Business Type :
Manufacturer
Main Products :
MBR Membrane, Residential RO Membrane, Industrial RO Membrane
Total Annual :
10000000-15000000
Employee Number :
101~200
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Ultrafiltration Membrane
MachineU China Products Machinery Environmental Machinery Water Treatment Machinery
Contact Supplier
Submit Requirement