MachineU > China Products > Rubber & Plastics > Rubber Raw Materials > Silicone Rubber
Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making
Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making
Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making
Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making
Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making
Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making
Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making
Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making
Specifications
Brand Name :
Hanast
Model Number :
HN-620
Certification :
MSDS
Place of Origin :
Guangdong, China
MOQ :
1 kilogram
Price :
Negotiable
Payment Terms :
T/T,Western Union
Supply Ability :
200tons/week
Delivery Time :
5-8 workdays
Packaging Details :
25KG/ Iron Drum
Appearance :
White/Translucent Liquid
Feature :
Tear Resistant
Grade :
Industrial
MOQ :
1KG
Packaging :
25kgs . 200kgs
Application :
Industrial Mold Making
Color :
Semi-Transparent
Features :
low shrinkage
Description

Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making

Tin Cure Silicone Rubber

HN-620 A/B is a high-performance, two-component liquid silicone system. It is designed for ease of use with a 100:2 mixing ratio by weight. This product features Room Temperature Vulcanization (RTV), allowing it to cure naturally without the need for additional heat, ensuring a simplified and efficient molding process.

Technical parameter of Tin Cure Silicone Rubber

Technical Data Sheet (Standard & Professional)
  • Model: HN-620AB
  • Key Feature: High Temperature Resistance
  • Viscosity: 170,000 cP/cs
  • Specific Gravity: 1.06 g/cm³
  • Hardness: 20 Shore A
  • Tensile Strength: 3.1 - 3.6 MPa
  • Tear Strength: 19.8 - 24.3 kN/m
  • Elongation at Break: 600% - 720%
  • Linear Shrinkage: ≤ 0.2%
  • Curing Agent Ratio: 2% - 3%
  • Pot Life (Working Time): 30 - 40 Minutes
  • Curing Time: 3 - 4 Hours


Feature of Tin Cure Silicone Rubber

1. Exhibits strong tear resistance, high and low temperature resistance, acid and alkali resistance, and aging resistance;

2. Possesses good fluidity, facilitating foam release, easy demoulding, and ensures the finished product does not exhibit whitening;

3. Silicone molds allow for frequent turnover and offer an extended service life;

4. The linear shrinkage rate is less than two thousandths;

5. Product color, hardness, viscosity, and operating time can be adjusted as required.

Method of Application:
1 After shaking the curing agent (Part B), weigh the material according to the ratio of A: B = 100:2 and mix and stir evenly. The bottom and the walls of the container must be well scraped to ensure that the silicone and curing agent are fully mixed here. It must be stirred evenly. If not, it will affect the service life of the silicone mold.

2 Degas the well-mixed rubber under a vacuum, the vacuuming time should not be too long, generally not more than 10 minutes.

3 The mold can be fully cured after 4 hours at room temperature. Do not heat to cure.Even if you want to heat it up to accelerate its curing time, the temperature is not recommended to be higher than 100 °C. For best results, molds are best left for 24 hours before use.

1 After shaking the curing agent (Part B), weigh the material according to the ratio of A: B = 100:2 and mix and stir evenly. The bottom and the walls of the container must be well scraped to ensure that the silicone and curing agent are fully mixed here. It must be stirred evenly. If not, it will affect the service life of the silicone mold.

2 Degas the well-mixed rubber under a vacuum, the vacuuming time should not be too long, generally not more than 10 minutes.

3 The mold can be fully cured after 4 hours at room temperature. Do not heat to cure.Even if you want to heat it up to accelerate its curing time, the temperature is not recommended to be higher than 100 °C. For best results, molds are best left for 24 hours before use.

Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold MakingLow Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making
Send your message to this supplier
Send Now

Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making

Ask Latest Price
Watch Video
Product Detail
Brand Name :
Hanast
Model Number :
HN-620
Certification :
MSDS
Place of Origin :
Guangdong, China
MOQ :
1 kilogram
Price :
Negotiable
Contact Supplier
video
Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making
Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making
Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making
Low Viscosity Liquid Silicone Rubber For Fine Detail Sculpture And Craft Mold Making

Shenzhen Hanast New Material co.,LTD

Verified Supplier
2 Years
guangdong, shenzhen
Since 2010
Business Type :
Manufacturer, Agent, Trading Company
Main Products :
Silicone Potting Compound, Epoxy Potting Compound, Platinum Cure Silicone Rubber
Total Annual :
5000000-10000000
Employee Number :
50~100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Tin Cure Silicone Rubber
MachineU China Products Rubber & Plastics Rubber Raw Materials Silicone Rubber
Contact Supplier
Submit Requirement