HANAST HN-5508 A/B Waterproof Electrical Epoxy Potting Compound 200kg for Electronics Encapsulation

HN-5508 A/B is a two-component, waterproof electrical epoxy potting compound developed for the electronics and electrical industry. Mixed at a 5:1 ratio by weight, it flows with low viscosity and long pot life, penetrates narrow gaps, and cures into a smooth, glossy, high-hardness (Shore D 85-95) black encapsulant. It provides strong electrical insulation, moisture and water resistance, and acid/alkali and thermal-cycling resistance, sealing and protecting electronics in harsh environments. Available in bulk 200kg supply for high-volume production.

Key Features

• Waterproof and moisture-proof sealing for electronics, circuit boards and electrical components
• High dielectric strength of 20-22 kV/mm with volume resistivity of 1.1 x 10¹⁵ ohm.cm for electrical insulation
• High hardness Shore D 85-95 for rigid, compression- and impact-resistant protection
• Acid and alkali resistance, aging resistance and good thermal-cycling resistance for harsh environments
• 5:1 two-component system, room-temperature cure or 60-80°C accelerated cure
• Low viscosity and long pot life (2-3 h) for easy casting, narrow-gap penetration and automatic dispensing
• High temperature resistance from -30°C to 130-150°C heat distortion temperature
• Cures to a bubble-free, smooth, glossy surface with low shrinkage (0.35-0.55%)
• RoHS compliant, non-dangerous goods, and supplied in bulk 200kg kits for volume production
• Custom OEM/ODM formulation of colour, viscosity, pot life, hardness and cure speed

Technical Specifications

Applications

HN-5508 A/B is widely used for waterproof electrical potting and protection of electronic and electrical components: transformers, power supply modules, resistors, filters, temperature sensors, temperature controllers, high-voltage packages, high-voltage ignition coils, circuit boards (PCB), LED drivers, aquarium equipment, negative-ion generators and ultrasonic atomizers. It also suits harsh-environment and outdoor electronics, including downhole drilling and industrial control electronics exposed to moisture, chemicals and temperature cycling.

Factory Direct & Bulk Supply

Hanast is a direct potting compound factory based in Guangdong, China, with a dedicated R&D laboratory. We supply HN-5508 A/B in bulk (including 200kg sets) across Asia and worldwide with factory-direct wholesale pricing, and offer custom OEM/ODM formulation of colour, viscosity, pot life, hardness and cure speed, with samples delivered in 3-5 working days.

Packaging & Storage

Supplied as Component A (25 kg plastic barrel) and Component B (5 kg plastic pot), or as a ready 30 kg/set kit, with 200kg bulk packaging available for volume orders. Store in original, tightly sealed containers in a cool, dry, well-ventilated area at around 25°C, protected from direct sunlight, moisture and extreme temperatures. Shelf life is 6 months from date of manufacture. Classified as non-dangerous goods for transport.

About this supplier

Shenzhen Hanast New Material Co., Ltd. is a premier high-tech enterprise and leading source manufacturer specializing in the R&D, manufacturing, and global supply of industrial silicone materials. As a strategic branch of the renowned Shenzhen Kanglibang Technology Co., Ltd., Hanast integrates over a decade of chemical adhesive expertise with a cutting-edge 40,000-square-meter modern production base (including our newly expanding Jiangmen facility) to deliver high-capacity, reliable material solutions worldwide.

We serve as a vital tier-one supplier and OEM/ODM partner for global factories, procurement managers, and engineering teams across diverse sectors, including electric vehicles (EV), battery energy storage systems (BESS), solar inverters, LED lighting, and industrial automation.

FAQ

Q1: What is HN-5508 A/B and which applications does it suit?
A1: HN-5508 A/B is a 5:1 two-component waterproof electrical epoxy potting compound with Shore D 85-95 hardness and high dielectric strength. It is widely used for transformers, power supplies, resistors, filters, sensors, circuit boards, LED drivers and harsh-environment electronics.

Q2: Is it waterproof and suitable for harsh environments?
A2: Yes. It is waterproof and moisture resistant (water absorption below 0.03%) and provides acid/alkali resistance, aging resistance and thermal-cycling resistance, so it protects electronics in humid, chemical, outdoor and industrial environments.

Q3: How does epoxy compare with silicone and polyurethane potting compounds?
A3: Epoxy (like HN-5508 A/B) offers high hardness, high dielectric strength and strong chemical resistance with excellent bonding and mechanical protection. Silicone is more flexible and higher-temperature, while polyurethane offers intermediate flexibility; epoxy is preferred for rigid, high-insulation electronic encapsulation.

Q4: What are the mix ratio, cure schedule and electrical properties?
A4: Mix at a 5:1 ratio by weight; pot life is 2-3 hours at 25°C, tack-free in 6-8 hours and fully cured in 12-16 hours at 25°C (or 1.5-2 hours at 60-80°C). Dielectric strength is 20-22 kV/mm and volume resistivity is 1.1 x 10¹⁵ ohm.cm.

Q5: Do you offer 200kg bulk supply, and what are the MOQ and delivery time?
A5: Yes, 200kg bulk supply is available with factory-direct wholesale pricing. MOQ is 1 kg, supplied in 30 kg/set kits (25 kg A + 5 kg B) or bulk sets; samples ship in 3-5 working days and bulk orders in 7-15 days.