Cold Rolled 0.5mm 0.6mm 0.8mm 1mm Thick 316 316L Stainless Steel Strip Coil For Welded Pipes
316 vs 304 Stainless Steel: Which is Better?
When comparing 304 stainless steel vs 316, they both have pros and cons to consider when deciding which one to use for different applications. For instance, 316 stainless steel is more resistant than 304 to salt and other corrosives. So, if you are manufacturing a product that will often face exposure to chemicals or a marine environment, 316 is the better choice.
On the other hand, if you are manufacturing a product that does not need strong corrosion resistance, 304 is a practical and economical choice. For many applications, 304 and 316 are actually interchangeable.
What should you not use on stainless steel?
7 Cleaning Products You Should Never Use on Stainless Steel
- Harsh abrasives.
- Scouring powders.
- Steel wool.
- Bleach and other chlorine products.
- Glass cleaners that contain ammonia, such as Windex.
- Tap water, especially if yours tends to be hard water (use clean distilled or filtered H2O instead)
- Oven cleaners.
| Product Name | ASTM /AISI / SUS 316 316L Stainless Steel Strips |
| Grade | 201,202, 301,302,303,304, 304L,316,316L,321,308,308L,309,309L,309S,309H,310,310S ,410,420, 430,2205,2507,409,904L etc |
| Specification | Thickness:cold rolled 0.1~3mm hot rolled 3mm~6mm per customized |
| Width:5mm~1500mm, we can accept your customized width. |
| Finish/Surface: NO.1,2B,BA,8K,No.4,HL,SB,Embossed,Checkered, etc... |
| Standard | ASTM A240/240M ; ASME SA-240/SA-240M; JIS G4305; DIN/BS/NF EN10028-7 ; ISO;GB/T 3280-2015 |
| Technology | Cold Rolled; Hot Rolled |
| Edge | Slit Edge; Cut Edge, Smooth, burr-free, Rounded Edge |
| Trade Term | EXW , FOB , CIF , CFR, DDU, etc . |
| Application | Dinner set, Kitchen ware, Owner frame of security door, Auto vent-pipe, Vacuum cup Clean bucket water sink and so on |
| Advantages | Factory Price; Top quality; First-rate service; We have many long-term customers to prove our reputation. |
| Chemical Composition |
| ASTM | JIS | DIN/BS/NF EN | GB/T | ISO | C≤ | Si≤ | Mn≤ | P≤ | S≤ | Ni | Cr |
S20100
201 | SUS201 | X12CrMnNiN17-7-5
1.4372 | 12Cr17Mn6Ni5N
(1Cr17Mn6Ni5N) | X12CrMnNiN17-7-5 | 0.15 | 1 | 5.50-7.50 | 0.5 | 0.03 | 3.50-5.50 | 16.00-18.00 |
S20200
202 | SUS202 | X12CrMnNi18-9-5
1.4373 | 12Cr18Mn9Ni5N
(1Cr18Mn8Ni5N) | ----------- | 0.15 | 1 | 7.50-10.00 | 0.5 | 0.03 | 4.00-6.00 | 17.00-19.00 |
S30100
301 | SUS301 | X5CrNi17-7
1.4319 | 12Cr17Ni7
(1Cr17Ni7) | X5CrNi17-7 | 0.15 | 1 | 2 | 0.045 | 0.03 | 6.00-8.00 | 16.00-18.00 |
S30400
304 | SUS304 | X5CrNi18-10
1.4301 | 06Cr19Ni10
(0Cr18Ni9) | X5CrNi18-9 | 0.08 | 1 | 2 | 0.045 | 0.03 | 8.00-11.00 | 18.00-20.00 |
S30403
304L | SUS304L | X2CrNi19-11
1.4306 | 022Cr19Ni10
(00Cr19Ni10) | X2CrNi19-11 | 0.03 | 1 | 2 | 0.045 | 0.03 | 8.00-12.00 | 18.00-20.00 |
S30900
309 | SUH309 | X12CrNi23-13
1.4833 | 16Cr23Ni13
(2Cr23Ni13) | X12CrNi23-13 | 0.2 | 1 | 2 | 0.04 | 0.03 | 12.00-15.00 | 22.00-24.00 |
S30908
309S | SUS309S | X12CrNi23-13
1.4833 | 06Cr23Ni13
(0Cr23Ni13) | X12CrNi23-13 | 0.08 | 1 | 2 | 0.045 | 0.03 | 12.00-15.00 | 22.00-24.00 |
S31000
310 | SUH310 | X15CrNiSi25-21
1.4841 | 20Cr25Ni20
(2Cr25Ni20) | X8CrNi25-21 | 0.25 | 1 | 2 | 0.04 | 0.03 | 19.00-22.00 | 24.00-26.00 |
S31008
310S | SUS310S | X8CrNi25-21
1.4845 | 06Cr25Ni20
(0Cr25Ni20) | X8CrNi25-21 | 0.08 | 1 | 2 | 0.045 | 0.03 | 19.00-22.00 | 24.00-26.00 |
S31600
316 | SUS316 | X5CrNiMo17-12-2
1.4401 | 06Cr17Ni12Mo2
(0Cr17Ni12Mo2) | X5CrNiMo17-12-2 | 0.08 | 1 | 2 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
S31603
316L | SUS316L | X2CrNiMo17-12-2
1.4404 | 022Cr17Ni12Mo2
(00Cr17Ni14Mo2) | X2CrNiMo17-12-2 | 0.03 | 1 | 2 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
S31635
316Ti | SUS316Ti | X6CrNiMoTi17-12-2
1.4571 | 06Cr17Ni12Mo2Ti
(0Cr18Ni12Mo3Ti) | X6CrNiMoTi17-12-2 | 0.08 | 1 | 2 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
S32100
321 | SUS321 | X6CrNiTi18-10
1.4541 | 06Cr18Ni11Ti
(0Cr18Ni10Ti) | X6CrNiTi18-10 | 0.08 | 1 | 2 | 0.045 | 0.03 | 9.00-12.00 | 17.00-19.00 |
1.Good Quality and Complete Specifications
The cutting is flat and smooth,advanced technology reliable quality complete specifications. 2.Accurate Tolerance
Advanced machine production,exquisite workmanship,accurate thickness strict testing,each product is produced in strict accordance with the requirements.
3.Support Customization
There are many product styles, complete specifications,support customization.
4.Professional Packaging
Single box packaging.standard export sea-worthy packing and standard carton or according to customers demand for steel customized.
Certificates
