Prime Quality Tiso brand 316 316L Stainless Steel Coil Roll 304 Stainless Steel sheet Coil
304 vs 316 Stainless Steel: Heat Resistance
Heat resistance is an important factor to consider when comparing the different grades of stainless steel. The melting range of 304 is around 50 to 100 degrees Fahrenheit higher than 316. Although the melting range of 304 is higher than 316, they both have good resistance to oxidization in intermittent service up to 870°C (1500℉) and in continuous service at 925°C (1697℉).
· 304 SS: Handles high heat well, but continuous use at 425-860 °C (797-1580 °F) may cause corrosion.
· 316 SS: Performs best in temperatures above 843 ℃ (1550 ℉) and below 454 ℃ (850°F)
Price Difference of 304 Stainless Steel vs 316
What makes 316 more expensive than 304 stainless steel? The increase of nickel content and the addition of molybdenum in 316 makes it more expensive than 304. On average, the price of 316 stainless steel 40% higher than the price of 304 SS.
| Product Name | ASTM /AISI / SUS 201 321 316 304 Stainless Steel Coil/Roll |
| Grade | ASTM S30400 AISI304 SUS304 EN1.4301 ASTM316 ASTM316L SUS321 |
| Also we supply : 201,202, 301,302,303,304L,316,316L,321,308,308L,309,309L,309S,309H,310,310S ,410,420, 430,2205,2507,409,904L etc |
| Specification | Thickness:cold rolled 0.1~3mm hot rolled 3mm~6mm per customized |
| Width:914mm;1000mm;1219mm;1250mm;1500mm;1524mm or per customized |
| Finish/Surface: NO.1,2B,BA,8K,No.4,HL,SB,Embossed,Checkered, etc... |
| Standard | ASTM A240/240M ; ASME SA-240/SA-240M; JIS G4305; DIN/BS/NF EN10028-7 ; ISO;GB/T 3280-2015 |
| Technology | Cold Rolled; Hot Rolled |
| Edge | Mill Edge; Cut Edge |
| Trade Term | EXW , FOB , CIF , CFR, DDU, etc . |
| Application | Dinner set, Kitchen ware, Owner frame of security door, Auto vent-pipe, Vacuum cup Clean bucket water sink and so on |
| Advantages | Factory Price; Top quality; First-rate service; We have many long-term customers to prove our reputation. |
| Chemical Composition |
| ASTM | JIS | DIN/BS/NF EN | GB/T | ISO | C≤ | Si≤ | Mn≤ | P≤ | S≤ | Ni | Cr |
S20100
201 | SUS201 | X12CrMnNiN17-7-5
1.4372 | 12Cr17Mn6Ni5N
(1Cr17Mn6Ni5N) | X12CrMnNiN17-7-5 | 0.15 | 1 | 5.50-7.50 | 0.5 | 0.03 | 3.50-5.50 | 16.00-18.00 |
S20200
202 | SUS202 | X12CrMnNi18-9-5
1.4373 | 12Cr18Mn9Ni5N
(1Cr18Mn8Ni5N) | ----------- | 0.15 | 1 | 7.50-10.00 | 0.5 | 0.03 | 4.00-6.00 | 17.00-19.00 |
S30100
301 | SUS301 | X5CrNi17-7
1.4319 | 12Cr17Ni7
(1Cr17Ni7) | X5CrNi17-7 | 0.15 | 1 | 2 | 0.045 | 0.03 | 6.00-8.00 | 16.00-18.00 |
S30400
304 | SUS304 | X5CrNi18-10
1.4301 | 06Cr19Ni10
(0Cr18Ni9) | X5CrNi18-9 | 0.08 | 1 | 2 | 0.045 | 0.03 | 8.00-11.00 | 18.00-20.00 |
S30403
304L | SUS304L | X2CrNi19-11
1.4306 | 022Cr19Ni10
(00Cr19Ni10) | X2CrNi19-11 | 0.03 | 1 | 2 | 0.045 | 0.03 | 8.00-12.00 | 18.00-20.00 |
S30900
309 | SUH309 | X12CrNi23-13
1.4833 | 16Cr23Ni13
(2Cr23Ni13) | X12CrNi23-13 | 0.2 | 1 | 2 | 0.04 | 0.03 | 12.00-15.00 | 22.00-24.00 |
S30908
309S | SUS309S | X12CrNi23-13
1.4833 | 06Cr23Ni13
(0Cr23Ni13) | X12CrNi23-13 | 0.08 | 1 | 2 | 0.045 | 0.03 | 12.00-15.00 | 22.00-24.00 |
S31000
310 | SUH310 | X15CrNiSi25-21
1.4841 | 20Cr25Ni20
(2Cr25Ni20) | X8CrNi25-21 | 0.25 | 1 | 2 | 0.04 | 0.03 | 19.00-22.00 | 24.00-26.00 |
S31008
310S | SUS310S | X8CrNi25-21
1.4845 | 06Cr25Ni20
(0Cr25Ni20) | X8CrNi25-21 | 0.08 | 1 | 2 | 0.045 | 0.03 | 19.00-22.00 | 24.00-26.00 |
S31600
316 | SUS316 | X5CrNiMo17-12-2
1.4401 | 06Cr17Ni12Mo2
(0Cr17Ni12Mo2) | X5CrNiMo17-12-2 | 0.08 | 1 | 2 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
S31603
316L | SUS316L | X2CrNiMo17-12-2
1.4404 | 022Cr17Ni12Mo2
(00Cr17Ni14Mo2) | X2CrNiMo17-12-2 | 0.03 | 1 | 2 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
S31635
316Ti | SUS316Ti | X6CrNiMoTi17-12-2
1.4571 | 06Cr17Ni12Mo2Ti
(0Cr18Ni12Mo3Ti) | X6CrNiMoTi17-12-2 | 0.08 | 1 | 2 | 0.045 | 0.03 | 10.00-14.00 | 16.00-18.00 |
S32100
321 | SUS321 | X6CrNiTi18-10
1.4541 | 06Cr18Ni11Ti
(0Cr18Ni10Ti) | X6CrNiTi18-10 | 0.08 | 1 | 2 | 0.045 | 0.03 | 9.00-12.00 | 17.00-19.00 |
1.Good Quality and Complete Specifications
The cutting is flat and smooth,advanced technology reliable quality complete specifications. 2.Accurate Tolerance
Advanced machine production,exquisite workmanship,accurate thickness strict testing,each product is produced in strict accordance with the requirements.
3.Support Customization
There are many product styles, complete specifications,support customization.
4.Professional Packaging
Single box packaging.standard export sea-worthy packing and standard carton or according to customers demand for steel customized.
Certificates
