Juniper QSFPP-4X10GE-LR Compatible 4x10GbE QSFP+ LR Transceiver(SMF, 1310nm, MPO, DOM)
40G QSFP+ PSM4
This 4x10GbE QSFP+ LR transceiver is compatible with Juniper network equipment and equivalent to Juniper QSFPP-4X10GE-LR. It is programmed and tested to work with Juniper 40 Gigabit Ethernet (GbE) switches, routers and other optical transport devices in enterprise data centers and other high-performance computing networks application. It provides an ideal replacement to OEM transceiver at far less price. This QSFPP-4X10GE-LR equivalent contains an MPO connector for the optical interface and a 38-pin connector for the electrical interface.
• Functionally identical to Juniper QSFPP-4X10GE-LR
 • High Channel Capacity: 40 Gbps per optics
 • Up to 10km transmission for G.652 single mode fiber
 • 4 channels 1310nm DFB laser & 4 channels PIN photodetector array
 • Electrically hot-swappable
 • Compliant with IEEE 802.3ba 40GBASE-PSM4
 • Supports Digital Diagnostics Monitoring
 • RoHS6 Compliant
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit | Note | 
| Supply Voltage | Vcc | -0.3 | 3.6 | V | |
| Storage Temperature | TS | -40 | 85 | °C | |
| Relative Humidity | RH | 0 | 85 | % | |
| Damage Threshold, per Lane | DT | 3.4 | dBm | 
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
Optical Characteristics (TOP(C) = 0 to 70 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note | 
| Transmitter | ||||||
| Operating Wavelength | λc | 1270 | 1310 | 1350 | nm | |
| Ave. output power | PAVE | -5.2 | +1 | dBm | ||
|  			 Difference in launch power between any two lanes (OMA)  |  			DL | 5 | dB | |||
| Extinction Ratio | ER | 3.5 | dB | |||
| Peak power, each lane | PP | 4 | dBm | |||
| Dispersion penalty, each lane | TDP | 3.5 | dB | |||
|  			 Average launch power of OFF transmitter, each lane  |  			POFF | -30 | dB | |||
|  			 Eye Mask coordinates: X1, X2, X3, Y1, Y2, Y3  |  			 			 SPECIFICATION VALUES 0.23, 0.34, 0.43, 0.27, 0.35, 0.4  |  			 			 Hit Ratio = 5x10-5  |  		||||
| Receiver | ||||||
| Operating Wavelength | λc | 1270 | 1350 | nm | ||
| Stressed receiver sensitivity in OMA(OLSQ854XM-CDS1) | PSEN1 | -12.6 | dBm | 1 | ||
| Average Receive Power,each lane | PAVE | -11 | +2.4 | dBm | ||
| Receiver Reflectance | Rrx | -12 | dB | |||
| LOS Assert | Pa | -30 | dBm | |||
| LOS De-assert | Pd | -15 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | dB | |||
Notes:
1.Measured with conformance test signal at TP3 for BER = 10-12 Receiver Characteristics
Application
40G Ethernet and OTU3
 Proprietary Protocol and Density Applications
 Datacom/Telecom switch & router connections
 Data Aggregation and Backplane Applications
 High-performance computing networks
 Infiniband transmission at 4ch SDR, DDR and QDR