GE FANUC SERIES 90-30 PLC Digital I/O Module IC697CPX772 FACTORY SEALED


Description:

The IC697CPX772 is a Central Processing Unit (CPU) module from Emerson Automation’s Series 90-70 Programmable Logic Controller (PLC) series.

This module comes with multiple communication interfaces specifically, One (1) RJ11 Serial communication interface and Two (2) 9-pin D shell RS485 communication ports.

This processor supports SNP Slave, Break-Free SNP (Slave), SNPX and RTU serial protocols. This processor has built-in 512 KB of Random Access Memory (RAM) and 256 KB non-volatile flash memory.

This processor supports floating point calculations which is data format being used in real-world computations and transactions as floating point math supports decimal values.

It can accommodate up to 2K discrete input and discrete outputs of any combination and 8K Words of analog Input and output data.

This processor is equipped with an 80486DX4 microprocessor with clock speed of 96 MHz. For Bollean execution, it has an execution speed of 0.4 microseconds per Boolean instruction.

It also comes with a battery-backed Real-Time Clock (RTC) with accuracy of +/- 3.5 seconds per day, maximum and elapsed time clock accuracy of +/- 0.1%, maximum.

The module’s Lithium battery has catalog number of IC697ACC701 with shelf life of 5 years when operating at temperature of 20 Degree with memory retention period of 6 months.

The IC697CPX772 has current draw of 3.1 A and operating temperature of 0-60 Degree Celsius. The IC697CPX772 has a Three (3) position operation mode switch for locally changing the operating mode of the controller.

It also has Seven (7) status LEDs such as OK, RUN, EN, P1, P2 and P3. It also has a MEM PROTECT LED that indicates activates when memory protect switch is engaged.

The GE Fanuc IC697CPX772 module is a 96 megahertz CPU module.

The IC697CPX772 module is a 32-bit point module with 512 KB of user memory.

Additionally, the module contains 256 KB of non-volatile flash memory.

The IC697CPX772 module takes up one slot in the PLC rack.

The microprocessor used by the module is an 80486DX4 microprocesso

Product Summary:

• SNP/SNP-X Protocol: master, slave
• CCM Protocol: master, slave, peer
• RTU Modbus Protocol: slave only
• Description: Communication Coprocessor
• Simultaneous Communications: (up to 9.6 Kbps, or 19.2 Kbps individually
• User Maintenance Items: Restart Pushbutton - located immediately beneath the LEDs
• Two Serial Ports: Two 25-pin female connectors provide RS-232 and RS-422/RS-485 communication
• Type of Device: Communications Coprocessor, CCM, RTU, SNP, and SNPx Protocols
• SNP/SNP-X Protocol: master, slave
• CCM Protocol: master, slave, peer
• RTU Modbus Protocol: slave only
• Features: 12 Mhz, 80C186 Microprocessor, Three Status LEDs, Reset pushbutton