| Product SKUs | | |
| | | |
| SSG-6039P-E1CR16H | SuperStorage 6039P-E1CR16H (Black) | |
| | | |
| Motherboard | | |
| | | |
| Super X11DPH-T | | |
| | | |
| Processor/Cache | | |
| | | |
| CPU | Dual Socket P (LGA 3647) | |
| 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡, | | |
| 3 UPI up to 10.4GT/s | | |
| Support CPU TDP 70-205W | | |
| Cores | Up to 28 Cores | |
| Note | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) | |
| | | |
| System Memory | | |
| | | |
| Memory Capacity | 16 DIMM slots | |
| Up to 4TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM | | |
| Supports Intel® Optane™ DCPMM†† | | |
| Memory Type | 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM | |
| Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro | |
| †† Cascade Lake only. Contact your Supermicro sales rep for more info. | | |
| | | |
| On-Board Devices | | |
| | | |
| Chipset | Intel® C622 chipset | |
| SAS | SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID | |
| RAID 0, 1, 5, 6, 10, 50, 60 | | |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 | |
| Network Controllers | Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557 | |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | | |
| Graphics | ASPEED AST2500 BMC | |
| | | |
| Input / Output | | |
| | | |
| LAN | 2 RJ45 10GBase-T LAN ports | |
| 1 RJ45 Dedicated IPMI LAN port | | |
| USB | 4 USB 3.0 ports (rear) | |
| 1 Type A | | |
| VGA | 1 VGA port | |
| Serial Port / Header | 1 Fast UART 16550 port / 1 Header | |
| | | |
| System BIOS | | |
| | | |
| BIOS Type | 256Mb AMI UEFI | |
| | | |
| Management | | |
| | | |
| Software | Intel® Node Manager | |
| IPMI 2.0 | | |
| NMI | | |
| SPM, SUM | | |
| SuperDoctor® 5 | | |
| Watchdog | | |
| | | |
| PC Health Monitoring | | |
| | | |
| CPU | Monitors for CPU Cores, Chipset Voltages, Memory. | |
| 4+1 Phase-switching voltage regulator | | |
| FAN | Fans with tachometer monitoring | |
| Status monitor for speed control | | |
| Pulse Width Modulated (PWM) fan connectors | | |
| Temperature | Monitoring for CPU and chassis environment | |
| Thermal Control for fan connectors | | |
| | | |
| Chassis | | |
| | | |
| Form Factor | 3U Rackmount | |
| Model | CSE-836BE1C-R1K23B | |
| | | |
| Dimensions | | |
| | | |
| Width | 17.2" (437mm) | |
| Height | 5.2" (132mm) | |
| Depth | 25.5" (648mm) | |
| Weight | Gross Weight: 79 lbs (35.8 kg) | |
| Net Weight: 48 lbs (21.8 kg) | | |
| Available Colors | Black | |
| | | |
| Front Panel | | |
| | | |
| Buttons | Power On/Off button | |
| System Reset button | | |
| LEDs | Power status LED | |
| Hard drive activity LED | | |
| Network activity LEDs | | |
| System Information LED | | |
| Power fail LED | | |
| | | |
| Expansion Slots | | |
| | | |
| PCI-Express | 3 PCI-E 3.0 x16 slot | |
| 4 PCI-E 3.0 x8 slots | | |
| Slot 2 & 3 occupied by controller and JBOD Expansion Port | | |
| | | |
| Drive Bays | | |
| | | |
| Hot-swap | 16 Hot-swap 3.5" SAS3/SATA3 drive bays | |
| Optional | 2 Optional Onboard NVMe M.2 | |
| | | |
| Backplane | | |
| | | |
| SAS3 12Gbps single expander backplane, w/ 16x SAS3 3.5" drive slots and 2x mini-SAS HD connectors for JBOD expansion | | |
| | | |
| System Cooling | | |
| | | |
| Fans | 3 Hot-swap 8cm redundant PWM cooling fans | |
| 2 Hot-swap 8cm rear exhaust PWM fans | | |
| Redundant cooling | | |
| | | |
| Power Supply (76mm Width) | | |
| | | |
| 1200W Redundant Power Supplies with PMBus | | |
| Total Output Power | 1000W/1200W | |
| Dimension | 76 x 40 x 336 mm | |
| (W x H x L) | | |
| Input | 100-127Vac / 15-12A / 50-60Hz | |
| 200-240Vac / 8.5-7A / 50-60Hz | | |
| 200-240Vdc / 8.5-7A (for CCC only) | | |
| +12V | Max: 83A / Min: 0A (100-127Vac) | |
| Max: 100A / Min: 0A (200-240Vac) | | |
| Max: 100A / Min: 0A (200-240Vdc) | | |
| +5Vsb | Max: 4A / Min: 0A | |
| Output Type | 19 Pairs Gold Finger Connector | |
| Certification | Titanium Level | |
| | | |
| [ Test Report ] | | |
| | | |
| Operating Environment | ||
| | | |
| RoHS | RoHS Compliant | |
| Environmental Spec. | Operating Temperature: | |
| 10°C ~ 35°C (50°F ~ 95°F) | | |
| Non-operating Temperature: | | |
| -40°C to 60°C (-40°F to 140°F) | | |
| Operating Relative Humidity: | | |
| 8% to 90% (non-condensing) | | |
| Non-operating Relative Humidity: | | |
| 5% to 95% (non-condensing) | | |


