MachineU > China Products > Machinery > Chemical & Pharmaceutical Machinery > Chemical Machinery & Equipment > Separation Equipment
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
Specifications
Sewage Output Pressure :
≤0.3 Mpa
Slag Cavity Volume :
2 L
Kinematical Viscosity :
1.9-5.5 mm²/s
MOQ :
1
Power :
11kw-15kw
Bowl Speed :
7800 rpm
Discharge Type :
Variable discharge
Separating Temperature :
40-60℃ (best)
Voltage :
220,380,440,460V
Certification :
CCS ISO CE
Density :
<900 kg/m³ (20℃)
Weight :
730kg
Capacity :
14000LPH
Output Type :
Centripetal pump
Price :
$11,761.45
Place of Origin :
Jiangsu, China
Motor Power :
11-15 kW
Brand Name :
Kingreat
Oil Output Pressure :
≤0.2 Mpa
Dimensions :
1200mm*810mm*1225mm
Description

3-phase Water Oil Treatment Separator

Product Overviews

Model PDSD14000 separator is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil and o

ther mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine

life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of

solid particle from liquid.

The machine adopts automatic control, and has the advantages of high efficiency, low oil consumption, convenient

operation and economic maintenance cost.

The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully.

The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can run for long time with

low vibration, safety and security.

The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”.

Principle&Structure

3 Phase Water Oil Treatment Separator

Advantages

  1. Moisture sensor(No-gravity ring) technology is adopted to ensure the quality of the oil after separation.
  2. Bowl with full hydraulic structure brings more thorough slag discharge, more stable and reliable performance.
  3. The new type seamless belt drive(No second tensioning required) brings more reliable structure and more simplified mechanical structure.
  4. High rotating speed ensure the best separation effect.
  5. Our separator is with low power consumption and light weight, which is in accordance with the requirements of the national industry.

Technical parameters

1. Separator single machine

Model

PDSD14000

Rated capacity

L/h

14000 (0# diesel)

Bowl rotating speed

rpm

7800

Output pressure of clear oil

Mpa

≤0.2

Output pressure of sewage

Mpa

≤0.3

Motor power

kW

11-15

Weight(special tools included)

kg

730

Full volume of the slag cavity

L

2

Discharge Type

Variable discharge

Type of output

Centripetal pump

Dimension of single machine

L × W × H (mm)

1200*810*1225

Condition for mineral oil separation and actual capacity(refer to the chart)

Oil types

Fuel oil

Lubrication oil

Steam turbine oil

Fuel oil

Heavy fuel oil

SAE30, 40

Detergence oil

Kinematical viscosity

(mm²/s)

1.9-

5.5

5.5-

24

120

180

380

100-120

61.2-74.8

40℃

50℃

40℃

40℃

Density

(kg/m³)(20℃)

< 900

900-991

880-900

< 900

Separating temperature

(℃)

Normal temperature,

40-60 best

90-98

80-95

Recommended capacity

(L/h)

17500

14000

7700~

8400

6300~

7000

4900~

5600

7000~

8400

3500~4200

11200~11900

If you have special requirement, please connect with us.

Value analyisi

1. According to the requirements of each classification society, all modules are equipped with oil leak alarm and

high temperature alarm.

2. Oil hydraulic,pneumatic control part adopts the Brand BURKERT (Germany).

3. Heater adopts brand SWEP (Germany).

4. Pressure control adopts Korean products or WIKA products

5. Screw pump is used instead of gear pump.

6. All equipped with automatic temperature control device (Made by the RTK production in Germany or made in China)

7. The main electrical components of standard electrical control box are produced by Schneider company while PLC is

produced by or Mitsubishi.

8. The complete sets referred above are all Peony’s production of automatic Standard Controls and we certainly can modify

the configuration list according to customers’ specified requirements.

Photos on site

3 Phase Water Oil Treatment Separator

Packing & Delivery

3 Phase Water Oil Treatment Separator

Our Services

3 Phase Water Oil Treatment Separator

3 Phase Water Oil Treatment Separator

3 Phase Water Oil Treatment Separator

3 Phase Water Oil Treatment Separator

Send your message to this supplier
Send Now

3 Phase Water Oil Treatment Separator

Ask Latest Price
Product Detail
Sewage Output Pressure :
≤0.3 Mpa
Slag Cavity Volume :
2 L
Kinematical Viscosity :
1.9-5.5 mm²/s
MOQ :
1
Power :
11kw-15kw
Bowl Speed :
7800 rpm
Contact Supplier
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator
3 Phase Water Oil Treatment Separator

ZHANGJIAGANG CITY PEONY MACHINERY CO.,LTD

Verified Supplier
14 Years
jiangsu, nanjing
Since 1990
Business Type :
Manufacturer, Distributor/Wholesaler, Exporter, Trading Company, Seller, Other
Main Products :
Basket Centrifuge, Decanter Centrifuge, Industrial Centrifuge Solution
Total Annual :
35Million -40Million
Employee Number :
50~100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Mineral Oil Centrifuge​
MachineU China Products Machinery Chemical & Pharmaceutical Machinery Chemical Machinery & Equipment Separation Equipment
Contact Supplier
Submit Requirement